CD/MD Changer, Operations | Clarion VRX835 instruction

VISUAL Operations

Notes:

•When a normal 4:3 size image, not being a wide one, is viewed by displaying it fully on a wide moni- tor display in a wide mode or a full-wide mode, a part of the peripheral image will be lacking or de- formed. In deference to the intention of producer, an original image can be viewed in a normal mode.

•During superimposed display, it becomes a full- wide mode.

•In the DVD changer, when the monitor display size is set in the CINEMA mode, a part of playback display such as play time may not be shown depending on the play disc.

In this case, change the monitor display size to a mode other than the CINEMA mode.

Monitoring the CCD camera

The CCD camera can be connected to this unit. For the power supply of the camera, mount the power box sold separately (CAA-188).

Note:

•This function is not available when the display is stored.

Switching to the Composite Screen

∗The composite Screen is the image of device connected to the CCD/M.LOCK terminal.

∗This function is available when a navigation system, etc. is connected to the CCD/M.LOCK terminal.

∗This function is not available when a CCD camera is connected to the CCD/M.LOCK terminal.

1.When the panel is open, press the [M.LOCK] button to switch to the composite screen. At this time, the sound from the vehicle speakers can be heard on the mode selected using the [FUNC] button.

2.When the panel is open and the composite screen is shown, press the [M.LOCK] button again to return to the previous screen.

Switching CONNECT(connect)

∗This function is available when a CCD,etc. is con- nected to the CCD/M.LOCK terminal.

∗When a navigation system is connected, set this mode to “NAVI”.

When an external device other than a navigation system, set this mode to “OTHERS”.

∗The factory default setting is “OTHERS”.

1.When the panel is open, press the [ADJ] but- ton to display the ADJUST MODE menu.

2.Touch the [z] key two times to select “CON- NECT”.

Touch the [CONNECT] key to select “NAVI” or “OTHERS”.

3.Press the [ADJ] button again or touch the [RTN] key, the unit returns to the previous mode.

	CD/MD Changer		English
	CD/MD changer functions
	Operations
	When an optional CD (MD) changer is con-
	can control a total of 2 changers (MD and/or		Owner’s
	nected through the CeNET cable, this unit con-
	trols all CD (MD) changer functions. This unit		manual
	CD).

Press the [FUNC] button and select the CD changer mode to start play. If 2 CD (MD) chang- ers are connected, press the [FUNC] button to select the CD (MD) changer for play.

∗If “NO MAG” appears in the display, insert the magazine into the CD changer. “LOADING” ap- pears in the display while the player loads (checks) the magazine.

∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.

∗If “NO DISC” appears in the display, load MDs into the MD changer.

CAUTION

CD-ROM discs cannot be played in the CD changer.

Pausing play

1.Press the [s] button for 1 second or longer to pause play. “PAUSE” appears in the display.

2.To resume play, press the [s] button for 1 second or longer again.

∗The same operation is also available using the [s] key in the menu screen while in the CD/ MD changer mode.

∗When the panel is open, the same operation is also available by using the [s] button in the panel.

Displaying CD titles (CD)

This operation is only possible when this unit is connected with a CD-text compatible CD changer. When a title is longer than 10 charac- ters, the same operation can be performed on a CD.

VRX835 25