Clarion VRX835 owner manual Display, Precautions, Information Panel, Handling Compact Discs

Page 3

English

Owner’s

5. DISPLAY

The Color LCD Display and the Information Panel on the main unit show the following displays, provid- ing information about the mode and functions operated.

Information Panel

2. PRECAUTIONS

WARNING

For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard.

English

Owner’s

Handling Compact Discs

Use only compact discs bearing the mark.

Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R mode may not be usable.

Even when recorded in CD-RW mode, some CDs not be usable.

Handling

Storage

English

Owner’s

manual

Preset channel indication Disc number indication

*The disc numbers corresponding to the discs in the CD or MD or DVD changer light.

: Volume indication

Operation status indication

*The frequency, play time, clock, etc. are displayed.

: Search indication

: Mute indication

: Z-enhancer indication

: Stereo indication

: Loudness indication

: Disc indication

: Repeat indication

: Random indication

1.When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (CD/ MD) or the optical parts of the player and proper playback may not be possible. If mois- ture forms on the disc (CD/MD), wipe it off with a soft cloth. If moisture forms on the op- tical parts of the player, do not use the player for about one hour. The condensation will dis- appear naturally allowing normal operation.

2.Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.

3.This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

4.TV broadcast reception

When receiving the TV broadcasts, the strength of the signals changes since the car is moving, so in some cases it may not be possible to receive clear pictures.

TV signals are strongly linear, so reception is affected by buildings, mountains and other obstacles.

Such external factors such as electric train lines, a high voltage lines, and signal de- vices may disturb the picture or cause noise.

If the reception is poor, switch to a station with good reception.

Caution on Handling

On CDs

Exercise a good precaution when loading a CD disc with the panel open.

Never turn off the power and remove the unit from the car with a CD loaded.

manual

New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any rough- ness from the edge of the disc.

Ball-point pen

Roughness

Never stick labels on the surface of the com- pact disc or mark the surface with a pencil or pen.

Never play a compact disc with any cello- phane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player.

Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.

To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Do not use commercially available CD protec- tion sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Do not expose compact discs to direct sun- light or any heat source.

Do not expose compact discs to excess hu- midity or dust.

Do not expose compact discs to direct heat from heaters.

Cleaning

To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the cen- ter of the compact disc to the circumference.

Do not use any solvents, such as commer- cially available cleaners, anti-static spray, or thinner to clean compact discs.

After using special compact disc cleaner, let the compact disc dry off well before playing it.

manual

Be sure to unfold and read the next page.

8

VRX835

VRX835

3

VRX835

4

Image 3
Contents 2002/12 A·C 280-7943-00 QC-6800KContents FeaturesHandling Compact Discs PrecautionsDisplay Information PanelNames of Buttons When the display openWhen the display closed Controls NomenclatureColor LCD Display ∗1 An example screen indication in the radio mode ∗6 ∗7 Inserting the Batteries Remote ControlMode Radio DVD changer Button Functions of Remote Control Unit ButtonsAttaching the DCP Removing the DCPCleaning Cleaning the cabinetLCD panel/Generalities Operations Turning on and off the power Adjusting the volumeSwitching the display Selecting a modeOpening and turning the display Basic Operations Showing a mode displayAdjusting the angel, etc. Housing the liquid crystal panelTurning on and off the monitor Setting the Z-enhancerAdjusting the Z-enhancer Basic OperationsTurning on/off the loudness Adjusting the bass and trebleAdjusting the balance and fader Changing the setting of the display backgroundRadio Operations ISR memory Preset scanRadio Operations Manual memory Instant station recall ISR Auto storeCD Operations Random play Touch the SUB Mode key in the Menu display to show SUB ModeCD Operations Scan play Displaying CD titles Repeat playChanging over monitor display size Switching to the Visual modeSwitching the VTR system between Ntsc and PAL Visual OperationsOperations CD/MD ChangerTouch the Direct key 1 to 6 and select the desired MD Scrolling titles MDSelecting an MD Selecting a disc from 1 toDisc repeat play When playing a disc 1 toTop function CD Top function MDDVD Changer Operation Scan playback DVD Changer OperationSkipping a chaptersearching Fast forward and fast backwardDisc repeat playback Random playback DVD Changer Operation Repeat playback Track repeat playbackTV Operations Manual memory Manual tuning TV Operations Seek tuning Recalling a preset stationTV Operations Setting the TV diverSetting the TV area Other FunctionsOther Functions Adjusting the dimmer levelSetting the button illumination Setting the beepDSP operations DSP operations Selecting the Standard mode or the professional modeWoofer level adjustment Detail adjustment of listening positionEQ effect ON/OFF Calling G.EQ Basic Pattern/USER PatternPress the A-M button to change into the Standard display Calling DSF Basic Pattern/USER Setting and storing DSF PropertiesMemory into User Pattern DSF effect ON/OFFCalling VSE Basic Pattern/USER Pattern Setting and storing VSE Properties/ Memory into User PatternSelect the channel to be compensated front or rear Calling P.EQ Basic Pattern/USER PatternGain BandPlay/Still Center level adjustmentDVD Deck video Operations DVD deck video functionsCase of Difficulty Problem Cause MeasureCheck it again Error Error DisplaysSpecifications 46 VRX835 VRX835 Do not open the case. There are no user ser Install the unit within 30 of the horizontal plane. FigureInstalling the Main Unit Screw Spring into hole a of the hook plate, then Removing the Main UnitWire Connection Description Monitor will stay off TV tuner Front Speakers RearRear View MonitorChannel Set the CeNET/STAND Alone switch to the CeNET positionFront CeNET TV Tuner Rear