DSP operations
English
Owner’s manual
●Woofer out adjustment
Select woofer output out of “STEREO”, “MONO”, or “OFF”.
Touch the select a desire item key to set it.
●Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”, “80Hz”, “120Hz”.
Touch the select a desire item key to set it.
●HPF adjustment
Select HPF slope out of “50Hz”, “80Hz”, “120Hz”, or “OFF”.
Touch the select a desire item key to set it.
●Test Tone Output
Select Test Tone Output
Touch the select a desire item key to produce a test tone.
4.After adjustment (setting), touch the [RTN] key to return to the adjustment selection dis- play.
5.Press the [ADJ] button again or touch the
[RTN] key to return to the STANDARD display.
Selecting the Standard mode or the professional mode
∗The factory default setting is “STANDARD”.
1.Press the [ADJ] button to switch to the ad- justment selection display.
2.Touch the [z] key two times to select “AC PROCESSOR”.
Entering titles
You can give a title to the user memory of the G.EQ, DSF, VSE and P.EQ that you have ad- justed yourself.
1.Press the
2.Touch the [USER] key to select the “USER”.
3.Touch the [USER TITLE] key to select the user memory to which you want to give a title.
4.Touch the [TITLE] key in the USER TITLE display, the display switches to the title input mode display.
5.Touch the characters, symbols, etc. shown in the display to enter titles.
“←, →” : Centering
“BS” : Backspace
“ 
” : Space
“MEMO” : Memory
“z(w)” : Scroll
Note:
•Up to 8 characters can be input.
•To switch the character types, touch the scroll key (w) at the lower left of the display.
6.Repeat the step 5 to input the title.
7.Touch the [MEMO] key for 2 seconds or longer to store the title into memory.
8.Press the
Touch the [AC PROCESSOR] key to select “PRO” and “STANDARD”.
3.Touch the [PRO] or [STANDARD] to select a desired mode and to set the mode thus se- lected.
4.After setting, press the [ADJ] button again to return to the STANDARD display.
Standard mode/Setting the listening position
Selection of listening position
1.Press the
2.Touch the [z] key to select “POSI. SELECT”.
Woofer level adjustment
You can adjust an output sound level of subwoofer.
1.Press the
2.Touch the [WOOFER VOL] key to show the woofer level adjusting display.
3.Touch the [w] or [z] key to adjust the level (0 to 14)
4.After adjustment, touch the [RTN] key to re- turn to the STANDARD display.
Touch the [POSI. SELECT] key to set the lis- tening position type.
There are FULL SEAT, FRONT R (only right seat), FRONT L (only left seat), FRONT (only front seats), REAR (only rear seats) and PASS available for the listening position types.
∗The factory default setting is “FULL SEAT”.
Detail adjustment of listening position
1.Press the
36 VRX835