Turning on/off the loudness

Basic Operations

screen to return to the AUDIO-MODE screen.

Touch the [RTN] key on the AUDIO-MODE screen to return to the STANDARD display.

∗To return from the Z-Enhancer level mode display to the STANDARD display, press the [A-M] button once again.

The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.

∗This function is enabled only when the panel is open.

Adjusting the bass and treble

Notes:

•This function is enabled only when the panel is open.

•This function can be adjusted only when the Z- enhancer is OFF.

1.Press the [A-M] button to change into the AUDIO-MODE display.

2.Touch the [BAS/TREB] key when the AUDIO- MODE screen is being displayed to show the BASS/TREBLE LEVEL adjustment screen.

3.Touch the [w] or [z] key to adjust to the desirable BASS/TREBLE level (adjustment range: from -6 to 6).

4.When adjustment is finished, touch the [RTN] key on the BASS/TREBLE LEVEL adjustment screen to return to the AUDIO-MODE screen.

Touch the [RTN] key on the AUDIO-MODE screen to return to the STANDARD display.

∗To return from the BASS/TREBLE LEVEL mode display to the STANDARD display, press the [A-M] button once again.

Adjusting the balance and fader

Note:

•This function is enabled only when the panel is open. 1. Press the [A-M] button to change into the

AUDIO-MODE display.

2.Touch the [BAL/FAD] key when the AUDIO- MODE screen is being displayed to show the BALANCE/FADER adjustment screen.

3.Touch the [Î] or [Å] key to adjust to the de- sirable balance.

Adjusting range of the balance: left 13 to right 13

4.Touch the [w] or [z] key to adjust to the de- sirable fader.

Adjusting range of the fader: front 12 / rear 12

5.When adjustment is finished, touch the [RTN] key on the BALANCE/FADER adjustment screen to return to the AUDIO-MODE screen.

Touch the [RTN] key on the AUDIO-MODE screen to return to the STANDARD display.

∗To return from the BALANCE/FADER mode display to the STANDARD display, press the [A-M] button once again.

1.Press the [A-M] button for 1 second or longer to select Loudness ON. The “LD” indicator lights in the display.

2.Press the [A-M] button for 1 second or longer to select Loudness OFF. The “LD” indicator goes off.

Note:

•When using a sold separately digital sound pro- cessor (DPH910) or DVD player (DVS9755z), a feature called auto loudness is selected. This function is different from the loudness effect. For further details on the auto loudness feature, refer to the subsection “Output adjustment of auto loudness, subwoofer and playback band”.

Changing the setting of the display background

WARNING

Perform the setting of this function the car is stopped with the parking break applied.

1.Press the [DISP] button to show the back- ground setup menu.

2.Touch the setting key to show the setup dis- play.

●To set up the pattern and colour of the wall paper

2-1. Touch the [WALL PAPER] key to select “PATTERN” or “COLOR”.

2-2. Touch the [PATTERN] or [COLOR] key to set a desired pattern or colour.

2-3. Touch a desired [PATTERN] or [COLOR] key.

●To set up the motion pattern

2-1. Touch the [MOTION PATTERN] key to set a desired motion pattern.

2-2. Touch a desired [MOTION PATTERN] key.

●To set up the sprite pattern

2-1. Touch the [SPRITE PATTERN] key to set a desired sprite pattern.

2-2. Touch a desired [SPRITE PATTERN] key.

3.Press the [DISP] button again or touch the [RTN] key two times to return to the STAN- DARD display.

English

Owner’s manual

VRX835 19