DSP operations
English
Owner’s manual
Calling P.EQ BASIC Pattern/USER Pattern
1.Press the
2.Touch the [z] key to select “P.EQ BASIC” and “P.EQ USER” mode.
Touch the [P.EQ BASIC] and [P.EQ USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.
3.In the pattern selecting display, touch the one of pattern key to call corresponding P.EQ pattern. In this display, pressing the No. but- ton in corresponding to the [DIRECT] key can also call the P.EQ pattern.
∗After selecting the P.EQ Pattern, touch the
[MEMO] key to copy the select pattern to the USER pattern.
∗Touch the [EDIT] key to show P.EQ adjusting display, in which the properties of currently selected pattern can be adjusted.
∗By pressing the [BAND] button in BASIC pattern selecting display or USER pattern selection/memory display you can switch between the two patterns, BASIC and USER.
●“GAIN”
Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)
●“Q”
Set the sharpness of the
5.After making adjustments to a desired pat- tern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BASIC/USER pattern selection/memory display.
6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted P.EQ pattern to the USER memory.
7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE INPUT] key.
∗For title inputting method, refer to the section “Entering titles”.
8.Press the
4.After the selecting, press the
Setting and storing P.EQ Properties/ Memory into USER Pattern
1.In the Basic adjustment display or in the User setting display, press the
2.Touch the [EDIT] key to show the P.EQ ad- justing display.
3.Select an item to be adjusted by touching [ITEM] key in the P.EQ adjusting display.
4.Touch the [ITEM] key to set each adjusting value.
The P.EQ adjustment contents are as fol- lows:
●“FRONT/REAR”
●“BAND”
Select the channel to be compensated (front or rear).
●“FREQUENCY”
Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)
40 VRX835