Clarion VRX835 Setting and storing DSF Properties, Memory into User Pattern, DSF effect ON/OFF

English

Owner’s manual

DSP operations

Standard mode/DSF operations		Setting and storing DSF Properties/
		Memory into USER Pattern
DSF effect ON/OFF
		1.	Repeat the steps 1 and 2 of the previous
∗ The factory default setting is “ON”.			procedure (Calling DSF BASIC Pattern/
1. Press the [A-M] button to show the AUDIO-
			USER Pattern) to show BASIC pattern se-
	MODE display.		lecting display or USER pattern selection/
2. Touch the [DSF ON/OFF] key to select “on”			memory display.
	and “off”.	2.	Touch the [EDIT] key to show the DSF ad-
3.	Each time the [ON/OFF] key is touched, the		justing display.
	on and off statuses are switched alternately.	3.	Select an item to be adjusted by touching
4.	After the setting, press the [A-M] button		[ITEM] key in the DSF adjusting display.
	again or touch the [RTN] key to return to the		There are “EFFECT”, “DELAY”, “REAR MIX”,
	STANDARD display.		“REVERB TIME” (ROOM SIZE) and “HIGH”
Note:			(LIVENESS).
• If the DSF effect is set to OFF, the adjustment		4.	Touch the [w] or [z] key to set each adjust-
made in “DSF operations” is not reflected in the			ing value.
music source.		5. After making adjustments to a desired pat-
Calling DSF BASIC Pattern/USER			tern by repeating the operations of items 3
			and 4, touch the [RTN] key to change over to
Pattern			the BASIC/USER patterns selection/memory
1. Press the [A-M] button to show the AUDIO-			display.
		6.	Press and hold one of [DIRECT] button for 2
	MODE display.
2. Touch the [z] key to select DSF mode.			seconds or longer to store the adjusted DSF
	Touch the [DSF BASIC1], [DSF BASIC2]		pattern to the USER memory.
		7.	To set a title of the stored USER pattern,
	and [DSF USER] key to show BASIC pattern
	selecting display or USER pattern selection/		touch the [TITLE] key to change into the
	memory display.		[TITLE INPUT] key.
3. In the pattern selecting display, touch the one			∗ For title inputting method, refer to the section
	of pattern key to call corresponding DSF		“Entering titles”.
	mode.	8.	Press the [A-M] button to change into the
	In this display, pressing the No. button in cor-		STANDARD display.
	respondence to the [DIRECT] key can also
	call the DSF mode.	Professional mode/VSE
	∗ After selecting the DSF mode, touch the
		operations
	[MEMO] key to copy the selected pattern to

the USER pattern.

∗ Touch the [EDIT] key to show DSF adjusting	Note:
	• The adjustment made in professional mode is not
display, in which the properties of currently
	reflected in the adjustment in standard mode. On
selected pattern can be adjusted.
	the contrary, the adjustment made in standard
∗ By pressing the [BAND] button in BASIC
	mode is not reflected in the adjustment in profes-
pattern selecting display or USER pattern
	sional mode.
selection/memory display you can switch
between the two patterns, BASIC and USER.

4.After the setting, press the [A-M] button again or touch the [RTN] key two times to re- turn to the STANDARD display.

VSE effect ON/OFF

∗The factory default setting is “ON”.

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [VSE ON/OFF] key to select “on” and “off”.

3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

38 VRX835