Kenwood G-EQ300 instruction manual Demonstration method, To stop demonstration, Display

Page 11

Display

G-EQ300 (En/K)

Demonstration of equalizer curves can be displayed to help the user understand the features of the equalizer better.

1 1

: Keys and control used in the operations described on this page.

Demonstration method

1Play a music source.

2Select the “DEMO” mode.

DISPLAY

Each press switches the display modes as follows. 1 Graphic equalizer display mode

2Spectrum analyzer display mode

3 DEMO(Demonstration) mode

Demonstration is performed repeatedly in the following order.

GRAPHIC PARAMETRIC REFERENCE

MANUAL

To stop demonstration

DISPLAY

Image 11

Contents GRAPHIC EQUALIZER G-EQ300INSTRUCTION MANUAL KENWOOD CORPORATIONAC voltage selector switch Safety precautions2 Before applying power AC 110-120 / 220-240 V switchableCheck that the following accessories are present Special featuresContents Accessories3Caution Read this page carefully to ensure safe operation IMPORTANT SAFEGUARDSPOWER OFF IMPORTANT SAFEGUARDSUnpacking MaintenanceCleaning Before operation5 TAPE indicator STANDBY indicator1 MAIN POWER key Switch the unit ON mode 2 ON/STANDBY key 3 Standby indicator8 manuals of the related components Caution regarding placement Except for U.S.A., CanadaSet the TAPE 2 MONITOR switch to the monitoring position System connectionsAbout the system control operations AV CONTROL CENTER POWER AMPLIFIER GRAPHIC EQUALIZER CASSETTE DECKRemote Control About the system control connectionsGraphic equalizer display mode Switching the display modesDisplay Preparation1 Play a music source 2 Select the “DEMO” mode Demonstration methodTo stop demonstration “FLAT” key Operation of MANUAL featureTo cancel the equalizer effect Operation of graphic equalizerOperation of graphic equalizer Operation of REFERENCE featureFive exemplary patterns have been preset at the factory 3 Set to “REFERENCE”M5 Headphones Preset equalizer pattern M1 to M5Preset equalizer pattern R1 to R5 Pattern can be created and preset by the user in this mode2 Select the “EQ.ON” mode Creation of desired equalizer patternsOperation in PARAMETRIC mode 1 Select the “graphic equalizer display mode”7 Select the inclination of the curve 6 Adjust the level9 8 H Z 5 Select the center frequencyOperation in GRAPHIC mode 4 Select the frequency band to be adjusted5 Adjust its level 6 Fine adjustment of each frequency bandRegistration of EQUALIZER pattern To cancel the registered pattern2Preset the equalizer pattern Any equalizer pattern can be preset if it is being dis- playedThe five of the genre keys are also used as the pattern No. keys 1 Play a music source 2 Initiate the GENRE mode3 Select the genre of music 4 Select the desired tone patternMajor purposes of use provided by the USE keys To cancel GENRE modeREVERSE key 5 Select the purpose of use of the patternTo stop tape playback 1 Set the TAPE switch to ONUse of equalizer effect with tape Applying equalizer effect to tape playback4 Play the source to be recorded 5 Start recording it onto tape 1 Set the TAPE switch to OFFTape recording of sound with equalizer effect To stop tape recordingFunctions of graphic equalizer Compensation for the audio characteristics of the listening roomAdjustment of sound to your individual taste Functions of the graphic equalizerCause Operation to resetSymptom In case of difficultyEqualizer characteristic variable range SpecificationsSignal to noise ratio IHF Graphic equalizer characteristicsFor the U.S.A FCC WARNING MEMO Serial Number For your recordsModel