Kenwood G-EQ300 Display, Switching the display modes, Preparation, Graphic equalizer display mode

Page 10

Display

Display

G-EQ300 (En/K)

	Preparation	¦Ensure that the MAIN POWER key is set to
1	0	ON.
1	0

MAIN POWER

-ON ÐOFF

: Keys and control used in the operations described on this page.

Switching the display modes

1Press the ON/STANDBY key to turn the unit ON.

ON/STANDBY

2Select the desired display mode.

DISPLAY

Graphic equalizer display mode

Shows how each frequency range is compensated.

The graphic equalizer display also appears for about 5 seconds, even while the unit is in the spectrum analyzer display mode, when one of the following operation is performed.

1.Turning the unit ON.

2.An operation key associated with an equalizer operation is pressed.

Spectrum analyzer display mode

Displays the frequency distribution of the source being played to allow under standing at a glance.

The peak value of the varying level of each frequency range is held and displayed for about 0.5 second.

Each press switches the display modes as follows. 1 Graphic equalizer display mode

2Spectrum analyzer display mode

3 DEMO(Demonstration) mode










40		63				98				160					250				400				625						1k			1.5k				2.5k				3.9k				6.3k				10k				16 k

Peak hold level


























40		63				98				160					250				400				625						1k			1.5k				2.5k				3.9k				6.3k				10k				16 k

DEMO(Demonstration) mode

After “DEMO” is displayed, the demonstration of the graphic equalizer curves starts.

Image 10

Contents KENWOOD CORPORATION G-EQ300INSTRUCTION MANUAL GRAPHIC EQUALIZERAC 110-120 / 220-240 V switchable Safety precautions2 Before applying power AC voltage selector switchAccessories Special featuresContents Check that the following accessories are presentIMPORTANT SAFEGUARDS 3Caution Read this page carefully to ensure safe operationIMPORTANT SAFEGUARDS POWER OFFBefore operation MaintenanceCleaning Unpacking3 Standby indicator STANDBY indicator1 MAIN POWER key Switch the unit ON mode 2 ON/STANDBY key 5 TAPE indicatorSystem connections Caution regarding placement Except for U.S.A., CanadaSet the TAPE 2 MONITOR switch to the monitoring position 8 manuals of the related componentsAbout the system control connections AV CONTROL CENTER POWER AMPLIFIER GRAPHIC EQUALIZER CASSETTE DECKRemote Control About the system control operationsPreparation Switching the display modesDisplay Graphic equalizer display modeTo stop demonstration Demonstration method1 Play a music source 2 Select the “DEMO” mode Operation of graphic equalizer Operation of MANUAL featureTo cancel the equalizer effect “FLAT” key3 Set to “REFERENCE” Operation of REFERENCE featureFive exemplary patterns have been preset at the factory Operation of graphic equalizerPattern can be created and preset by the user in this mode Preset equalizer pattern M1 to M5Preset equalizer pattern R1 to R5 M5 Headphones1 Select the “graphic equalizer display mode” Creation of desired equalizer patternsOperation in PARAMETRIC mode 2 Select the “EQ.ON” mode5 Select the center frequency 6 Adjust the level9 8 H Z 7 Select the inclination of the curve6 Fine adjustment of each frequency band 4 Select the frequency band to be adjusted5 Adjust its level Operation in GRAPHIC modeAny equalizer pattern can be preset if it is being dis- played To cancel the registered pattern2Preset the equalizer pattern Registration of EQUALIZER pattern4 Select the desired tone pattern 1 Play a music source 2 Initiate the GENRE mode3 Select the genre of music The five of the genre keys are also used as the pattern No. keys5 Select the purpose of use of the pattern To cancel GENRE modeREVERSE key Major purposes of use provided by the USE keysApplying equalizer effect to tape playback 1 Set the TAPE switch to ONUse of equalizer effect with tape To stop tape playbackTo stop tape recording 1 Set the TAPE switch to OFFTape recording of sound with equalizer effect 4 Play the source to be recorded 5 Start recording it onto tapeFunctions of the graphic equalizer Compensation for the audio characteristics of the listening roomAdjustment of sound to your individual taste Functions of graphic equalizerIn case of difficulty Operation to resetSymptom CauseGraphic equalizer characteristics SpecificationsSignal to noise ratio IHF Equalizer characteristic variable rangeFor the U.S.A FCC WARNING MEMO Model For your recordsSerial Number