Kenwood G-EQ300 Registration of EQUALIZER pattern, To cancel the registered pattern

Creation of desired equalizer patterns

G-EQ300 (En/K)

1 8

Registration of EQUALIZER pattern

1Create a desired equalizer pattern.

See “Creation of desired equalizer patterns“.

Any equalizer pattern can be preset if it is being dis- played.

2Preset the equalizer pattern.

1 Press the MEMORY key.

3 4 5 MEMORY

2Press one of the preset keys.

Press while MEMORY is lighted up.

1 2 3 4 5

“MEMORY” Lights up.

MEMORY

¦Pattern is preset under the number of the numeric key pressed. ¦Up to five patterns can be preset in the same manner.

¦When a pattern has previously been preset under the numeric key pressed, the newly preset pattern replaces the previous pattern.

To cancel the registered pattern

The registered equalizer pattern can be canceled and re- turned to the original pattern stored under the preset key (one of the factory-registered patterns M1 to M5 $).

1Display the equalizer pattern.

2Press and hold the preset key for more than 5 seconds.

1

2

3

4

5