LG Electronics 42LT770H, 47LT770H, 37LT770H, 32LT770H setup guide RF Configuration, IP Configuration

Page 13

Automated Installation Routine Wizard (Cont.)

(Continued from previous page)

RF Configuration

a)In the Media Type field, use the Left/Right arrow keys to select RF.

b)In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number for the Data Channel of the Pro:Centric server. The Data Channel can be set from 1 to 135.

IP Configuration

a)In the Media Type field, use the Left/Right arrow keys to select IP.

Note: By default, the initial Manual Configuration screen shows RF configuration fields. When you select “IP” as the Media Type, the Data Channel and Signal Strength fields are replaced with (IP) Address and Port fields.

b)In the Address and Port fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number.

The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.

4.Once all fields are completed as required, you may have two options (see also note below):

• To save the data entered and exit the wizard, use the arrow keys to select Save and Exit, and then press OK. The Pro:Centric application and/or E-Z Installation data will be downloaded to the TV at a later time. This option is useful, in particular, if the Pro:Centric server has not yet been configured.

• To initiate a real-time download of Pro:Centric application and/or E-Z Installation data, use the arrow keys to select Next, and then press OK.

The Pro:Centric Manual Configuration will proceed with the remaining Pro:Centric application and/or E-Z Installation data download steps, as shown on the second Manual Configuration screen (see example at right). When the Pro:Centric Manual Configuration is complete, the wizard exits, and the TV will turn OFF.

Note: If Media Type is set to “RF,” the RF signal must be present on the Data Channel of the Pro:Centric server in order for you to select “Next” (you will see a “Data Channel found” message below the signal strength indicator). If Media Type is set to “IP,” there must be a LAN cable connected between the TV and the network in order for you to select “Next.”

 

Manual Configuration

 

 

 

 

Move

OK

Prev.

 

 

 

Pro:Centric Mode

<

GEM

>

 

 

 

 

 

 

Media Type

 

 

RF

 

 

 

 

 

 

 

Data Channel

 

 

1

 

 

 

 

 

 

 

 

Signal Strength

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back

 

Save and Exit

 

 

Next

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual Configuration Screen with

RF Media Fields

Manual Configuration

 

 

 

Move

OK

Prev.

Pro:Centric Mode

 

 

GEM

 

 

 

Media Type

<

 

IP

>

 

 

Address

255

255

255

255

 

 

Port

 

 

0

 

 

 

Back

 

Save and Exit

 

Next

 

 

 

 

 

Manual Configuration Screen with

IP Media Fields

 

Manual Configuration

 

 

Prev.

 

 

 

 

Processing Pro:Centric Configuration.

 

 

 

 

 

 

Step 4 may take up to 5 min(s).

 

 

 

 

 

 

 

Please wait...

 

 

 

 

 

 

 

 

 

 

50%

 

 

 

Step 1

Detecting the type of Pro:Centric network

:

RF

 

Step 2

Locating the Pro:Centric Server

:

DIGITAL 75

 

Step 3

Determining the Pro:Centric mode

:

GEM

 

Step 4

Downloading the application files

:

In Progress

 

Step 5

Downloading the maintenance files

:

 

 

 

 

Step 6

Saving the Pro:Centric configuration

:

 

 

 

Warning - Do not remove AC power or the signal cables during these steps

206-4214

13

Image 13
Contents Copyright 2012 LG Electronics U.S.A., Inc 206-4214 Rev BFor Customer Support/Service, please call­ Overloading Power CordGrounding Disconnect DeviceOutdoor Antenna Grounding CleaningAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Setup Checklist Commercial Mode OverviewPass-through Mode External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric Operation ProCentric TV Interactive Menu FeaturesProCentric Interactive Menu Navigation ProCentric Setup Before you begin, note the following Automated Installation Routine WizardProCentric Manual Configuration ProCentric Auto ConfigurationIP Configuration RF ConfigurationUSB Configuration Clonable TV Setup Menu Features Custom Master TV SetupBefore You Begin Cloning MethodsSet Installer Menu items Custom Master TV Setup ProcedureTurn on the TV Optional Run Auto Tuning Set up TV featuresRecommended Lock the channel lineup Verify the TV setupAccessing the Installer Menu Installer MenuAcronym Description Exiting the Installer Menu and Activating Updates Using the Installer MenuNavigation within the Installer Menu Changing Installer Menu SettingsBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughInstaller Sequence Detailed Descriptions of Installer Menu ItemsSleep Timer Mute DisableFeature Level HDMI1 EnableHDMI3 Enable HDMI2 EnableAUX Status Procentric Atsc Tune ModeBack Lighting Atsc BandData Channel Power SavingsTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewLearn Setup from Master TV USB Cloning ProceduresUSB Cloning Notes Teach Master TV Setup to Target TV XxLT770H-UA00001.TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via CPU or EBL FTG Mode of Operation OverviewFTG Mode via CPU FTG Mode via EBLTV Setup Menus Determining the TV Operating ModeFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupFTG File Manager Utilities Overview FTG Configuration ListFTG File Manager Main Screen CLEAR/SAVEPrint MAP FTG Channel Map Configuration UtilityFTG Channel Map Editor UpdateADD ExitConfiguration Settings FTG Installer Menu Configuration UtilityAccessing the IP Environment Menu IP Environment SetupConfiguring the Network Connection Wireless Network Connection Wired Network ConnectionNetwork Status Network Connection Wireless network is connectedIP Stream Control Port Number fields become accessible ProCentric Application Mode Configuration Wake On LAN SetupMedia Share Setup Remote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections HDMI/DVIUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationTV Standby State TV Power On State Reference b-LAN Setup & Overview001 Default Off PowerUSB-to-TTL Serial Cable Reference FTG Mode via EBL Local ConfigurationPriority Video Audio Reference RJP Model List & Input Auto-sensing HierarchyInstaller Menu Item 117 Fact Default Reference Restoring Factory Defaults on the TVsAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Option Reference Wi-Fi Screen ShareSide Jack Panel Reference LT770H Rear and Side Jack PanelsReference External Speaker Setup Power Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Reset Clone Programmer After Static Shock Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Clone ProgrammerPTC Glossary of TermsCPU EBLDocument Revision History Document Revision History / Open Source Software NoticeOpen Source Software Notice Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 40 pages 22.94 Kb

47LT770H, 42LT770H, 32LT770H, 37LT770H specifications

LG Electronics has made significant strides in the world of display technology with its series of commercial televisions, including the models 37LT770H, 32LT770H, 42LT770H, and 47LT770H. These televisions are designed specifically for businesses, retail spaces, and other commercial usages, focusing on durability, professional performance, and versatile applications.

One of the standout features of the LT770H series is its Full HD resolution. With vibrant colors and crisp images, these displays ensure that content is presented in a clear and engaging manner. This high definition capability is essential for environments that require detailed visuals, such as presentations or advertisements in retail settings.

The LT770H series incorporates LG's advanced panel technology, which optimizes brightness and color fidelity. The screens are designed to perform well in various lighting conditions, making them ideal for areas with high ambient light. The high brightness levels enhance visibility, ensuring that messages remain impactful even in sunlight.

In terms of connectivity, the LT770H series boasts an array of ports, including HDMI, USB, and RS-232C. This versatility allows easy integration with various playback devices and systems, enabling seamless content sharing and display management from multiple sources. Businesses can therefore customize their signage or presentations to suit their needs without compatibility issues.

Additionally, these models feature the LG SuperSign Lite software which simplifies content management. This software allows users to create and schedule content, enabling dynamic displays that can change in real-time to reflect promotions, news, or other relevant information. The intuitive interface of the software makes it accessible for users with varying levels of technical expertise.

Durability is another key attribute of the LT770H series. Designed for continuous operation, these televisions can run for extended periods without overheating or compromising performance. This reliability is crucial for commercial environments where downtime is not an option.

In terms of design, the LT770H series is crafted with a sleek profile, allowing for easy mounting and integration into any environment. The modern aesthetics of these displays contribute to a professional look that complements various commercial settings.

In conclusion, the LG Electronics LT770H series, featuring models 37LT770H, 32LT770H, 42LT770H, and 47LT770H, represents a powerful solution for businesses seeking high-quality display options. With features such as Full HD resolution, superior connectivity, and user-friendly content management, these televisions are tailored for a range of commercial applications. Their durability and design ensure that they meet the demands of any professional environment, making them a reliable choice for businesses looking to enhance their visual communication strategies.