LG Electronics 37LT770H, 47LT770H, 42LT770H Wired Network Connection, Wireless Network Connection

Page 50

IP Environment Setup (Cont.)

Wired Network Connection

1.The next Network Connection window will enable you to specify the IP and DNS configuration for this TV. Auto (DHCP) tabs will be selected by default. If a DHCP server is configured and a static configuration is not required, you can simply select OK (on the screen) and then press OK on the Installer Remote. The DHCP server will assign an IP address and DNS server to the TV once the TV successfully connects to the network.

Otherwise, use the arrow keys to select the Static tab(s), and specify the static configuration data for both the IP and DNS modes. When all fields are completed, select OK (on the screen) and press OK on the Installer Remote.

Note: You can specify a static DNS server with an auto- configured IP address but not vice versa.

The TV will attempt to connect to the network and you will see a progress screen that indicates status as each network element is confirmed (see example at right). If the network is connected successfully, a “Wired network is connected” message will be displayed at the top of the screen and the network configuration data will be displayed in the lower half of the screen.

2.Select Complete (if not already selected), and then press OK on the Installer Remote to exit the Network Connection wizard and return to the IP Environment Menu.

Note: If the network connection is not successful, the progress screen will identify the network element in which the connection failed. Check your cabling and/or, if necessary, press on the Installer Remote to return to the Configure IP and DNS Modes screen to verify the configuration data.

Wireless Network Connection

1.In the next Network Connection window, use the arrow keys on the Installer Remote to select the type of wireless connection to configure and press OK.

AP List: Select from a list of available access points.

Enter the SSID: Direct enter the SSID of an access point whose SSID has not been enabled for broadcast (i.e., the access point does not appear in the AP List).

WPS-PBC: Connect to a network via an access point that is enabled for PBC.

WPS-PIN: Complete network/PIN verification via the access point web interface.

Ad-hoc: Connect to a network via a Wi-Fi device, such as a PC, mobile phone, etc.

Network Connection

 

Configure IP and DNS modes.

 

 

Auto (DHCP) or Static

 

 

IP Mode

Auto (DHCP)

 

 

Static

 

 

IP Address

0

0

0

0

 

Subnet Mask

0

0

0

0

 

Gateway

0

0

0

0

DNS Mode

Auto (DHCP)

 

 

Static

 

 

DNS Server

0

0

0

0

 

 

OK

 

 

 

Network Connection

 

 

 

Wired network is connected.

TV

Gateway

DNS

Internet

MAC Address

: AA:BB:CC:DD:EE:23

Gateway

: 10.10.10.10

IP Address

: 10.2.3.4

DNS Server

: 10.5.6.7

Subnet Mask

: 255.255.255.0

 

 

 

Complete

 

Network Connection

Select the type of wireless network connection.

 

AAA

 

 

 

 

 

 

AP List

 

BBB

 

 

 

 

 

 

CCC

 

 

 

 

 

Enter the SSID

 

DDD

 

 

 

 

 

 

 

EEE

 

 

 

 

 

 

WPS-PBC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WPS-PIN

 

 

 

 

 

 

 

 

 

Choose from APs to connect to the network.

Ad-hoc

(Continued on next page)

50

206-4214

Image 50
Contents 206-4214 Rev B Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup Automated Installation Routine Wizard Before you begin, note the followingProCentric Auto Configuration ProCentric Manual ConfigurationRF Configuration IP ConfigurationUSB Configuration Before You Begin Custom Master TV SetupClonable TV Setup Menu Features Cloning MethodsTurn on the TV Custom Master TV Setup ProcedureSet Installer Menu items Set up TV features Optional Run Auto TuningVerify the TV setup Recommended Lock the channel lineupAcronym Description Installer MenuAccessing the Installer Menu Navigation within the Installer Menu Using the Installer MenuExiting the Installer Menu and Activating Updates Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENDetailed Descriptions of Installer Menu Items Installer SequenceFeature Level Mute DisableSleep Timer HDMI1 EnableAUX Status HDMI2 EnableHDMI3 Enable Back Lighting Atsc Tune ModeProcentric Atsc BandPower Savings Data ChannelChannel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV XxLT770H-UA00001.TLL Teach To TV TLL TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchFTG File Manager Main Screen FTG Configuration ListFTG File Manager Utilities Overview CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPADD UpdateFTG Channel Map Editor ExitFTG Installer Menu Configuration Utility Configuration SettingsConfiguring the Network Connection IP Environment SetupAccessing the IP Environment Menu Wired Network Connection Wireless Network ConnectionNetwork Connection Wireless network is connected Network StatusIP Stream Control Port Number fields become accessible Wake On LAN Setup ProCentric Application Mode ConfigurationMedia Share Setup TV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup HDMI/DVIChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerReference FTG Mode via EBL Local Configuration USB-to-TTL Serial CableReference RJP Model List & Input Auto-sensing Hierarchy Priority Video AudioAdditional FTG Mode via CPU Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference Wi-Fi Screen Share OptionReference LT770H Rear and Side Jack Panels Side Jack PanelReference External Speaker Setup Reference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Clone ProgrammerCPU Glossary of TermsPTC EBLOpen Source Software Notice Document Revision History / Open Source Software NoticeDocument Revision History Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 40 pages 22.94 Kb

47LT770H, 42LT770H, 32LT770H, 37LT770H specifications

LG Electronics has made significant strides in the world of display technology with its series of commercial televisions, including the models 37LT770H, 32LT770H, 42LT770H, and 47LT770H. These televisions are designed specifically for businesses, retail spaces, and other commercial usages, focusing on durability, professional performance, and versatile applications.

One of the standout features of the LT770H series is its Full HD resolution. With vibrant colors and crisp images, these displays ensure that content is presented in a clear and engaging manner. This high definition capability is essential for environments that require detailed visuals, such as presentations or advertisements in retail settings.

The LT770H series incorporates LG's advanced panel technology, which optimizes brightness and color fidelity. The screens are designed to perform well in various lighting conditions, making them ideal for areas with high ambient light. The high brightness levels enhance visibility, ensuring that messages remain impactful even in sunlight.

In terms of connectivity, the LT770H series boasts an array of ports, including HDMI, USB, and RS-232C. This versatility allows easy integration with various playback devices and systems, enabling seamless content sharing and display management from multiple sources. Businesses can therefore customize their signage or presentations to suit their needs without compatibility issues.

Additionally, these models feature the LG SuperSign Lite software which simplifies content management. This software allows users to create and schedule content, enabling dynamic displays that can change in real-time to reflect promotions, news, or other relevant information. The intuitive interface of the software makes it accessible for users with varying levels of technical expertise.

Durability is another key attribute of the LT770H series. Designed for continuous operation, these televisions can run for extended periods without overheating or compromising performance. This reliability is crucial for commercial environments where downtime is not an option.

In terms of design, the LT770H series is crafted with a sleek profile, allowing for easy mounting and integration into any environment. The modern aesthetics of these displays contribute to a professional look that complements various commercial settings.

In conclusion, the LG Electronics LT770H series, featuring models 37LT770H, 32LT770H, 42LT770H, and 47LT770H, represents a powerful solution for businesses seeking high-quality display options. With features such as Full HD resolution, superior connectivity, and user-friendly content management, these televisions are tailored for a range of commercial applications. Their durability and design ensure that they meet the demands of any professional environment, making them a reliable choice for businesses looking to enhance their visual communication strategies.