LG Electronics 32LT770H, 47LT770H Custom Master TV Setup, Before You Begin, Cloning Methods

Page 15

Custom Master TV Setup

This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode.

Note: Refer to “FTG Mode of Operation Overview” on pages 38 and 39 for information on FTG Mode operation and configuration.

Note: Cloning requirements and procedures are described in detail on pages 29 to 37.

Before You Begin

It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

Determine which cloning tool—USB memory device or clone programmer—is appropriate for your application; several of the Master TV Setup procedure steps are dependent on the cloning tool to be used. See “Cloning Methods” at right for further information.

If you intend to use a USB memory device, determine the type of file—either the new “.tlx” file format or the legacy “.tll” file format—to use for cloning purposes; several of the Master TV Setup procedure steps are dependent on the desired file type. See “Cloning Methods” at right for further information.

If the Automated Installation Routine Wizard appears on the screen, exit the wizard before beginning/continuing the Custom Master TV Setup procedure.

Cloning Methods

See also “Clonable TV Setup Menu Features” list below.

Using a USB Memory Device / .tlx File

The .tlx file format clones Installer Menu settings, IP Environment settings (with the exception of network configuration and Media Share / TV Name settings—see pages 49 to 55), and all TV sources’ (analog, digital, AV1, HDMI, etc.) clonable setup menu settings.

Not intended for cloning an auto-tuned/edited Channel Map, as the channel lineup is converted to a logical FTG Channel Map when saved (Learned) from a TV to a .tlx file. If the .tlx file with the FTG Channel Map is then used for Teaching purposes, all Target TVs will be configured for FTG Mode via CPU.

Using a USB Memory Device / .tll File

The .tll file format clones the contents of the commercial controller (PTC) memory, including an auto-tuned/edited Channel Map, Installer Menu settings, and one TV source’s (analog, digital, or Aux) clonable setup menu settings.

Using a Clone Programmer (TLL-1100A or LT2002)

Both the TLL-1100A and LT2002 clone the contents of the commercial controller (PTC) memory, including an auto-tuned/edited Channel Map, Installer Menu settings, and one TV source’s (analog or Aux) clonable setup menu settings.

Clonable TV Setup Menu Features

Channel

Audio

Option

Auto Tuning (Channel Lineup)

Auto Volume

Menu Language

Manual Tuning

Clear Voice

Audio Language

Channel Edit

Sound Mode

Caption

Channel Label

Balance

Lock

Picture

TV Speaker

Time

Movie Rating

Picture Mode

TV Rating – Children

 

Auto Clock

TV Rating – General

 

Auto Off (Sleep Timer)

 

 

 

 

Note: Some menu options vary between analog and digital channels and Aux inputs.

206-4214

15

Image 15
Contents Copyright 2012 LG Electronics U.S.A., Inc 206-4214 Rev BFor Customer Support/Service, please call­ Disconnect Device Power CordOverloading GroundingTransporting Product CleaningOutdoor Antenna Grounding Antenna Grounding According to NEC, ANSI/NFPATable of Contents Commercial Mode Overview Setup ChecklistPass-through Mode External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric TV Interactive Menu Features ProCentric OperationProCentric Interactive Menu Navigation ProCentric Setup Before you begin, note the following Automated Installation Routine WizardProCentric Manual Configuration ProCentric Auto ConfigurationIP Configuration RF ConfigurationUSB Configuration Cloning Methods Custom Master TV SetupClonable TV Setup Menu Features Before You BeginCustom Master TV Setup Procedure Set Installer Menu itemsTurn on the TV Optional Run Auto Tuning Set up TV featuresRecommended Lock the channel lineup Verify the TV setupInstaller Menu Accessing the Installer MenuAcronym Description Changing Installer Menu Settings Using the Installer MenuExiting the Installer Menu and Activating Updates Navigation within the Installer MenuBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughInstaller Sequence Detailed Descriptions of Installer Menu ItemsHDMI1 Enable Mute DisableSleep Timer Feature LevelHDMI2 Enable HDMI3 EnableAUX Status Atsc Band Atsc Tune ModeProcentric Back LightingData Channel Power SavingsTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewUSB Cloning Procedures Learn Setup from Master TVUSB Cloning Notes Teach Master TV Setup to Target TV XxLT770H-UA00001.TLL Teach To TV TLL MPI Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes TLL-1100A Clone ProgrammerOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via EBL FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via CPUDetermining the TV Operating Mode TV Setup MenusFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupCLEAR/SAVE FTG Configuration ListFTG File Manager Utilities Overview FTG File Manager Main ScreenPrint MAP FTG Channel Map Configuration UtilityExit UpdateFTG Channel Map Editor ADDConfiguration Settings FTG Installer Menu Configuration UtilityIP Environment Setup Accessing the IP Environment MenuConfiguring the Network Connection Wireless Network Connection Wired Network ConnectionNetwork Status Network Connection Wireless network is connectedIP Stream Control Port Number fields become accessible ProCentric Application Mode Configuration Wake On LAN SetupMedia Share Setup HDMI/DVI Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup TV ConnectionsUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationPower Reference b-LAN Setup & OverviewTV Standby State TV Power On State 001 Default OffUSB-to-TTL Serial Cable Reference FTG Mode via EBL Local ConfigurationPriority Video Audio Reference RJP Model List & Input Auto-sensing HierarchyAdditional FTG Mode via EBL Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via CPU OptionsReference TV Zone Restrictions Option Reference Wi-Fi Screen ShareSide Jack Panel Reference LT770H Rear and Side Jack PanelsReference External Speaker Setup Power Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartCommercial Mode Check / FTG Operation Troubleshooting FTG Operation TroubleshootingSymptom Possible Causes Solutions Clone Programmer Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Symptom Possible Causes Possible SolutionsEBL Glossary of TermsPTC CPUDate Description Document Revision History / Open Source Software NoticeDocument Revision History Open Source Software NoticeFor Customer Support/Service, please call­
Related manuals
Manual 40 pages 22.94 Kb

47LT770H, 42LT770H, 32LT770H, 37LT770H specifications

LG Electronics has made significant strides in the world of display technology with its series of commercial televisions, including the models 37LT770H, 32LT770H, 42LT770H, and 47LT770H. These televisions are designed specifically for businesses, retail spaces, and other commercial usages, focusing on durability, professional performance, and versatile applications.

One of the standout features of the LT770H series is its Full HD resolution. With vibrant colors and crisp images, these displays ensure that content is presented in a clear and engaging manner. This high definition capability is essential for environments that require detailed visuals, such as presentations or advertisements in retail settings.

The LT770H series incorporates LG's advanced panel technology, which optimizes brightness and color fidelity. The screens are designed to perform well in various lighting conditions, making them ideal for areas with high ambient light. The high brightness levels enhance visibility, ensuring that messages remain impactful even in sunlight.

In terms of connectivity, the LT770H series boasts an array of ports, including HDMI, USB, and RS-232C. This versatility allows easy integration with various playback devices and systems, enabling seamless content sharing and display management from multiple sources. Businesses can therefore customize their signage or presentations to suit their needs without compatibility issues.

Additionally, these models feature the LG SuperSign Lite software which simplifies content management. This software allows users to create and schedule content, enabling dynamic displays that can change in real-time to reflect promotions, news, or other relevant information. The intuitive interface of the software makes it accessible for users with varying levels of technical expertise.

Durability is another key attribute of the LT770H series. Designed for continuous operation, these televisions can run for extended periods without overheating or compromising performance. This reliability is crucial for commercial environments where downtime is not an option.

In terms of design, the LT770H series is crafted with a sleek profile, allowing for easy mounting and integration into any environment. The modern aesthetics of these displays contribute to a professional look that complements various commercial settings.

In conclusion, the LG Electronics LT770H series, featuring models 37LT770H, 32LT770H, 42LT770H, and 47LT770H, represents a powerful solution for businesses seeking high-quality display options. With features such as Full HD resolution, superior connectivity, and user-friendly content management, these televisions are tailored for a range of commercial applications. Their durability and design ensure that they meet the demands of any professional environment, making them a reliable choice for businesses looking to enhance their visual communication strategies.