IP Environment Setup (Cont.)
IP Configuration
1.In the Media Type field, use the Left/Right arrow keys to select IP.
Note: If the Media Type has already been set in the Automated Installation Routine Wizard, the specified value will be reflected in this field.
Note: Setting the Media Type to “IP” automatically sets the Data Channel field to “253.” You cannot alter this setting (unless you revert Media Type to “RF”). It is not possible to direct enter “253” in the Data Channel field.
2.In the Server IP and Port Number fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number.
The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.
Note: If the server IP address and port number have already been set in the Automated Installation Routine Wizard, the specified data will be reflected in these fields.
3.Once all fields are completed as required, either select Close and then press OK on the Installer Remote or press to return to the IP Environment Menu.
Pro:Centric Application Mode Configuration
1.In the Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric Application Mode
Note: If the Pro:Centric Mode is set to “Off,” Pro:Centric application data will not be downloaded.
Note: If the mode has already been set in the Installer Menu (Installer Menu item 098 PRO:CENTRIC) or in the Automated Installation Routine Wizard, the specified mode will be reflected in this field. If you change the mode in this menu, Installer Menu item 098 will now reflect the value you selected here.
2.Once all fields are completed as required, either select Close and then press OK on the Installer Remote or press to return to the IP Environment Menu.
Wake On LAN Setup
The Wake On LAN feature enables the TV to receive software updates and/or be powered ON upon receipt of Wake Up Frame packets and/or Magic Packet data via the LAN. This menu option enables you to specify Wake On LAN parameters.
1.With the IP Environment Menu on display, use the arrow keys
on the Installer Remote to select Wake On LAN. Then, press OK.
2.In the Wake On LAN
3.Once all fields are completed as required, either select Close and then press OK on the Installer Remote, or press to return to the IP Environment Menu.
WOL (Wake Up Frame) |
|
|
|
|
| < | Disabled | > | |
WOL (Magic Packet) |
|
|
| |
< | Disabled | > |
Close
54 |