LG Electronics 47LT770H, 42LT770H, 37LT770H Channel Icons / Custom Text Labels 2-5-4 + Menu Mode

Channel Icons / Custom Text Labels (2-5-4 + MENU Mode)

Changing Channel Icons and/or Adding or Editing Custom Text Labels in the Channel-Time Display

If there is no pre-assigned icon for a channel, you can add a custom text label of up to seven (7) characters to help identify the channel or network. Also, if desired, a custom text label can be added to the Channel-Time display in addition to a pre-assigned icon. You may also add text labels for the Aux input sources to clearly identify the devices that are connected to the Aux inputs.

		(Icon)
XYZ	XYZ	XYZ

NETWORK

1 2 3 4 5 6 7 (Custom Text Label)

Changing icons and/or adding or editing custom text labels can only be done if there are channels that have been transferred to the TV’s PTC either during Master TV Setup (see pages 15 to 18) or by cloning (USB memory device /

.tll file or clone programmer only).

Note: A blank letter space is available between “Z” and “!”.

To perform channel editing/labeling:

1.Access the Installer Menu (see “Accessing the Installer Menu” on page 19 for further information).

2.Press 2-5-4+ MENU SETTINGS on the Installer Remote to access the Channel Label Editing Menu.

3.Change channel icons and/or add or edit custom text labels as described in the procedures below. (You can do this more than once.)

4.To exit the menu when done, press MENU SETTINGS.

Changing a Channel’s Icon on the Master TV

1.Use Channel Up/Down to select the desired channel.

2.Use the Left/Right arrow keys to select the thin letter “I” on the Channel-Time display.

3.Use the Up/Down arrow keys to select the icon with which you want to identify the channel. (If you know the icon number, enter the number, and press OK.)

4.Proceed to add/edit custom text labels, or go to the next channel.

Adding/Editing Channel Labels on the Master TV

1.Use Channel Up/Down to select the desired channel.

2.Press the Left or Right arrow repeatedly until the numbers 1 to 7 appear on the display. The number shows the position of the character that can be changed. Number 1 is the first character, number 2 the second character, etc.

3.Use the Up/Down arrow keys to select the desired character.

4.Proceed to the next number posi- tion, or go to the next channel.

Adding/Editing Source Labels on the Master TV

1.Press INPUT to select the desired Aux input source: AV, RGB, HDMI, HDMI2, or HDMI3.

2.Press the Left or Right arrow repeatedly until the numbers 0 to 9 appear on the display. The number shows the position of the character that can be changed.

3.Use the Up/Down arrow keys to select the desired character.

4.Press INPUT for the next Aux input, or use Channel Up/Down to return to channels.

Installer Remote Control Key Functions for Master TV Channel Label Editing Menu

•Channel Up/Down: Tunes to the next channel in scan.

•Left/Right Arrows: Select the item to change. If “I” is shown, the icon can be changed. If a number is shown, it indicates the position of the character that can be changed.

•Up/Down Arrows: Select the icon or the character to be

displayed. Tip: Arrows can be held down for fast scrolling.

•0 – 9: Use to enter the index number of the icon, if known.

•OK: Changes the icon after the icon number has been entered.

•INPUT: Changes the Aux input label.

•MENU SETTINGS: Exits the editing process.

28 206-4214