LG Electronics 32LT770H, 47LT770H, 42LT770H, 37LT770H setup guide Optional Set the Clock

Page 35

Clone Programmer Cloning Procedures (Cont.)

(Optional) Set the Clock

Set the time on a Master TV’s clock. (If the time has already been copied from a TV into the TLL-1100A clone programmer, you can set the Master TV’s clock by copying the time from the clone programmer.) The TLL-1100A can copy the current time to both a Master TV and to the clone’s internal clock—accurate to within one minute.

Since the TLL-1100A’s time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port.

After the time is copied to the TLL-1100A clone programmer, the current time will be maintained and can then be transferred to another TV. (This can be a Master TV or another TV which has already had the features set up.)

Teach Master TV Setup to Target TV

1.Turn ON the Target TV.

The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV:

•If the wizard is displayed, the TV is already in the required factory default state. Use the Up/Down arrow keys on the Installer Remote to select Exit from the Welcome screen, and press OK to exit the wizard. Then, go to step 3.

•Otherwise, ensure the Target TV is in Pass-through Mode. Then, continue with step 2.

2.Use the Installer Remote to access the Target TV Installer Menu (see “Accessing the Installer Menu” on page 19 for further information). Set Installer Menu item 117 FACT DEFAULT to 001, and press OK. When the value changes back to 0, press OK again to exit the Installer Menu.

Note: This step restores factory default settings on the TV, which will in turn re-activate the Automated Installation Routine Wizard. Use the Up/ Down arrow keys on the Installer Remote to select Exit from the Welcome screen. Then, press OK to exit the wizard.

3.Tune/set the TV to an analog channel or Aux input (ideally the same source tuned for 2-5-5 + MENU Mode during the Master TV Setup procedure), and then connect the MPI cable to the MPI port on the Target TV. The Clone Selection Menu will display on the TV screen.

4.Ensure the correct Memory CBank(X) is selected on the TLL-1100A.

5.Press 2 on the Installer Remote to select TEACH TO TV from the Clone Selection Menu. Then, press OK to transfer the Master TV Setup to the Target TV.

Teaching usually takes 3 to 4 minutes. “TEACHING IN PROGRESS” will be displayed on the screen during Teaching. When the Teaching process is complete, a “TEACHING COMPLETE” message will be displayed.

6.When Teaching is done, disconnect the MPI cable from the Target TV, and turn OFF the TV.

7.After a few seconds, turn ON the TV, and verify that the Master TV Setup is now resident on the Target TV.

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2) TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

206-4214

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Copyright 2012 LG Electronics U.S.A., Inc 206-4214 Rev BFor Customer Support/Service, please call­ Disconnect Device Power CordOverloading GroundingTransporting Product CleaningOutdoor Antenna Grounding Antenna Grounding According to NEC, ANSI/NFPATable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup Before you begin, note the following Automated Installation Routine WizardProCentric Manual Configuration ProCentric Auto ConfigurationIP Configuration RF ConfigurationUSB Configuration Cloning Methods Custom Master TV SetupClonable TV Setup Menu Features Before You BeginTurn on the TV Custom Master TV Setup ProcedureSet Installer Menu items Optional Run Auto Tuning Set up TV featuresRecommended Lock the channel lineup Verify the TV setupAcronym Description Installer MenuAccessing the Installer Menu Changing Installer Menu Settings Using the Installer MenuExiting the Installer Menu and Activating Updates Navigation within the Installer MenuBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughInstaller Sequence Detailed Descriptions of Installer Menu ItemsHDMI1 Enable Mute DisableSleep Timer Feature LevelAUX Status HDMI2 EnableHDMI3 Enable Atsc Band Atsc Tune ModeProcentric Back LightingData Channel Power SavingsTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV XxLT770H-UA00001.TLL Teach To TV TLL MPI Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes TLL-1100A Clone ProgrammerOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via EBL FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via CPUFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupCLEAR/SAVE FTG Configuration ListFTG File Manager Utilities Overview FTG File Manager Main ScreenPrint MAP FTG Channel Map Configuration UtilityExit UpdateFTG Channel Map Editor ADDConfiguration Settings FTG Installer Menu Configuration UtilityConfiguring the Network Connection IP Environment SetupAccessing the IP Environment Menu Wireless Network Connection Wired Network ConnectionNetwork Status Network Connection Wireless network is connectedIP Stream Control Port Number fields become accessible ProCentric Application Mode Configuration Wake On LAN SetupMedia Share Setup HDMI/DVI Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup TV ConnectionsUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File GuidelinesStatic Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationPower Reference b-LAN Setup & OverviewTV Standby State TV Power On State 001 Default OffUSB-to-TTL Serial Cable Reference FTG Mode via EBL Local ConfigurationPriority Video Audio Reference RJP Model List & Input Auto-sensing HierarchyAdditional FTG Mode via EBL Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via CPU OptionsReference TV Zone Restrictions Option Reference Wi-Fi Screen ShareSide Jack Panel Reference LT770H Rear and Side Jack PanelsReference External Speaker Setup Power Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Symptom Possible Causes Possible SolutionsEBL Glossary of TermsPTC CPUDate Description Document Revision History / Open Source Software NoticeDocument Revision History Open Source Software NoticeFor Customer Support/Service, please call­
Related manuals
Manual 40 pages 22.94 Kb

47LT770H, 42LT770H, 32LT770H, 37LT770H specifications

LG Electronics has made significant strides in the world of display technology with its series of commercial televisions, including the models 37LT770H, 32LT770H, 42LT770H, and 47LT770H. These televisions are designed specifically for businesses, retail spaces, and other commercial usages, focusing on durability, professional performance, and versatile applications.

One of the standout features of the LT770H series is its Full HD resolution. With vibrant colors and crisp images, these displays ensure that content is presented in a clear and engaging manner. This high definition capability is essential for environments that require detailed visuals, such as presentations or advertisements in retail settings.

The LT770H series incorporates LG's advanced panel technology, which optimizes brightness and color fidelity. The screens are designed to perform well in various lighting conditions, making them ideal for areas with high ambient light. The high brightness levels enhance visibility, ensuring that messages remain impactful even in sunlight.

In terms of connectivity, the LT770H series boasts an array of ports, including HDMI, USB, and RS-232C. This versatility allows easy integration with various playback devices and systems, enabling seamless content sharing and display management from multiple sources. Businesses can therefore customize their signage or presentations to suit their needs without compatibility issues.

Additionally, these models feature the LG SuperSign Lite software which simplifies content management. This software allows users to create and schedule content, enabling dynamic displays that can change in real-time to reflect promotions, news, or other relevant information. The intuitive interface of the software makes it accessible for users with varying levels of technical expertise.

Durability is another key attribute of the LT770H series. Designed for continuous operation, these televisions can run for extended periods without overheating or compromising performance. This reliability is crucial for commercial environments where downtime is not an option.

In terms of design, the LT770H series is crafted with a sleek profile, allowing for easy mounting and integration into any environment. The modern aesthetics of these displays contribute to a professional look that complements various commercial settings.

In conclusion, the LG Electronics LT770H series, featuring models 37LT770H, 32LT770H, 42LT770H, and 47LT770H, represents a powerful solution for businesses seeking high-quality display options. With features such as Full HD resolution, superior connectivity, and user-friendly content management, these televisions are tailored for a range of commercial applications. Their durability and design ensure that they meet the demands of any professional environment, making them a reliable choice for businesses looking to enhance their visual communication strategies.
Top Page Image Contents