Installer Menu
Use the Installer Menu to set up or change operational settings.
See more detailed descriptions of the Installer Menu items on the pages that follow.
Accessing the Installer Menu
Make sure the TV is ON. Using an Installer Remote, press MENU repeatedly until the
The Installer Menu opens with item 000 INSTALLER SEQ 000. Use the Up/Down arrow keys to sequence through the available menu items, or access an item directly by keying in the line number and then pressing MENU. For example, to access the SLEEP TIMER option, which is item 015, press
Using the Installer Menu
Items 000 ~ 118 are immediately accessible only upon entering the Installer Menu. Refer to the table below as well as the following pages for item numbers, descriptions, ranges, factory default settings, and a place for listing any changes made
XXLH250H INSTALLER MENU
000 INSTALLER SEQ | 000 |
|
|
UPN | FPGA E0F1 |
PTC V1.00.000 | CPU V3.06.00 |
|
|
Typical TV Installer Menu
Note: The Installer Menu header will vary depending on the TV you are setting up.
Installer Menu Items 000 through 030
Menu Item | Function | Value Range | Default Value | Brief Description of Function and Comments |
000 | INSTALLER SEQ | 0 ~ 3 | 0 | Leave default set to 0. |
001 | POWER MANAGE | 0 ~ 7 | 0 | Sets number of hours of no activity before automatic shutoff. |
002 | AC ON | 0 / 1 | 0 | Set to 1 to enable Auto Turn On at power up. |
003 | BAND/AFC | 0 ~ 3 | 1 | Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC |
004 | STRT CHANNEL | 0 ~ 127, 255 | 255 | Channel at |
005 | CHAN LOCK | 0 / 1 | 0 | If set to 1, cannot tune from current channel. |
007 | STRT VOLUME | 0 ~ 63, 255 | 255 | Sets volume level at TV |
008 | MIN VOLUME | 0 ~ 63 | 0 | Sets minimum allowable volume setting. |
009 | MAX VOLUME | 0 ~ 63 | 63 | Sets maximum allowable volume setting. |
010 | MUTE DISABLE | 0 / 1 | 0 | Set to 1 to disable Mute Function. |
011 | KEY DEFEAT | 0 / 1 | 0 | Set to 1 to disable menu navigation keys on display panel. |
|
|
|
|
|
015 | SLEEP TIMER | 0 / 1 | 1 | Set to 1 to enable Sleep Timer. |
016 | EN TIMER | 0 / 1 | 0 | Set to 1 to enable On/Off Timers. |
017 | ALARM | 0 / 1 | 1 | Set to 1 to enable Alarm. |
021 | 0 / 1 | 1 | Set to 1 to enable | |
022 | MAX BLK HRS | 0 ~ 99 | 12 | Sets number of |
023 | CAPTION LOCK | 0 / 1 | 0 | Set to 1 to retain caption setting at power off. |
028 | CH. OVERIDE | 0 / 1 | 1 | If set to 0, limits direct access to favorite channels. |
029 | OLD OCV | 0 / 1 | 0 | Set to 1 to change MPI operation to OCV. |
030 | ACK MASK | 0 / 1 | 0 | If set to 1, changes MPI for some OCV boxes. |
24 |