LG Electronics 42LH255H, 42LH260H Embedded b-LAN Module EBL FTG Mode of Operation Overview

Embedded b-LAN™ Module (EBL) FTG Mode of Operation Overview

The following steps outline the FTG (Free-To-Guest) setup for individual TV control.

1.Set up commercial features of the TV. Enter the Installer Menu, and set all desired items as required (for example, Tuning Band, Start Channel, etc.). Refer to the “Installer Menu” section of this document for fur- ther information.

2.Install the FTG Configuration Application program on the PC that will be used to configure the EBL.

3.Connect the PC to the TV-LINK CFG jack on the rear panel using a USB-to-TTL serial cable (TTL-232R-5V-AJ).

4.Launch the FTG Configuration Application, and create a new or open an existing FTG Configuration file.

5.Build a Channel Map and “write” it to the EBL (converts EBL from Pass-Through Mode to FTG Mode).

6.If necessary, make changes to Installer Menu items using the FTG Installer Menu Configuration Utility and “write” the changes to the EBL in FTG Mode.

7.Save the FTG Configuration (.rml) file for future use.

8.Tune the TV to a Logical Channel in the Channel Map.

RESET UPDATE

RJP

GAME	AV IN 1	HDMI
CONTROL

VIDEO	AUDIO	..........
	2
	L(MONO) R	..........
	1

RGB IN (PC)

...............

AUDIO IN

(RGB / DVI)

HDMI/DVI IN

Y	PB	PR	L	R		.........
	VIDEO			AUDIO
	COMPONENT IN			SPEAKER OUT	REMOTE	RS-232C IN	TV-LINK
				(8 )	CONTROL OUT		CFG
						(SERVICE ONLY)

TV-LINK CFG Use for local FTG configuration.

Laptop

PC

USB-to-TTL Serial Cable for Connection to PC

206-4118 9