Pioneer XDV-P6 operation manual Playing CDs Listening to a CD, Pausing CD playback

Playing CDs

Listening to a CD

These are the basic steps necessary to play a CD with your DVD player. More advanced CD operation is explained starting on the next page.

1To select a desired disc press one of the 1–6 buttons on the DVD player.

Playback starts.

# The indicator of selectable disc holders light in blue. If a disc is not inserted, you cannot select

that disc holder.

# Each of the disc holders has corresponding indicator. About the indicator status, refer to

Loading a disc on page 15.

# You can also select a disc by pressing aor b

(DISC).

# This unit does not automatically change discs even if it reaches to the end of the currently play- ing disc. To change discs, press one of the 1–6 buttons on the DVD player or a/b(DISC).

2To skip back or forward to another track, press oor p.

Pressing pskips to the start of the next track. Pressing o once skips to the start of the current track. Pressing it again will skip to the previous track.

3To perform fast forward or reverse, press and hold m or n.

If you continue pressing m or n, the icon m/nis displayed. To resume playback at a

desired point, release m/n.

# There is no sound on fast forward or reverse.

Note

When playing discs with MP3/WMA files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/WMA and CD- DA by pressing MEDIA. This function can be op- erated only when the disc is playing.

Section

08

Stopping playback

%Press g.

#When you stop CD playback by pressing g, that location on the disc is memorized enabling playback from that point when you play the disc again.

#To play back the disc again, press f.

Pausing CD playback

Pause lets you temporarily stop disc playback.

% Press fduring playback.	Playing
The icon e appears in the display. Play of the
current track pauses.	CDs
# To resume playback at the same point that you
turned pause on, press fagain.

En 29