Section
02 
Before You Start
Note
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual prop- erty rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless
What the marks on DVDs indicate
The marks below may be found on DVD disc labels and packages. They indicate the type of images and audio recorded on the disc, and the functions you can use.
Mark Meaning
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
2
Indicates the number of audio sys- tems.
prohibited.
About WMA
2Indicates the number of subtitle lan-
guages.
Indicates the number of viewing an-
3 | gles. |
|
|
|
|
| Indicates the picture size (aspect ratio: |
| 16 : 9 |
| LB | |
|
| screen | ||
|
|
|
| |
|
|
|
| |
|
|
|
|
|
1 |
|
| Indicates the number of the region | |
|
|
|
| |
| ALL |
| where playback is possible. | |
|
|
|
|
|
The Windows Media™ logo printed on the box indicates that this unit can play back WMA data.
WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later.
Windows Media and the Windows logo are tra- demarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Notes
!This unit may not operate correctly depending on the application used to encode WMA files.
!Depending on the version of Windows Media Player used to encode WMA files, album
names and other text information may not be correctly displayed.
When an operation is prohibited
When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc.
When this happens, the icon 
appears on the screen.
!The icon 
may not appear with certain discs. 
Changing the mode switch setting
Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on the side surface of this unit for the compo- nent you are using it with. After changing the setting, be sure to press RESET.
8 | En |