Pioneer DVH-P5050MP installation manual Connection method, Left, Right

Connecting the Units

Connection method

1. Clamp the lead.	2. Clamp firmly with
	needle-nosed
	pliers.

Note

•The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.

English

Español

Power supply side

Ground side

Blue/white

To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC).

Parking brake switch

Deutsch Français

Front speaker

Left

Rear speaker

White

+

≠

White/black

Green

+

≠

Green/black

Gray
+	Front speaker
≠
Gray/black	Right
Violet
+	Rear speaker
≠
Violet/black

Italiano

With a 2 speaker system, do not connect anything

to the speaker leads that are not connected to speakers.

When you connect separately sold multi-channel processor (DEQ-P7050) to this unit, do not connect anything to the speaker leads and system remote control (blue/white).

Nederlands

En 5