Pioneer DEX-P99RS Audio Adjustments Operation modes, Introduction of audio adjustments

Page 24

Section

03Audio Adjustments

Operation modes

Extra functions

This unit’s 4-way network DSP lets you create a 4-way multi-amp, multi-speaker system with separate speakers for reproduction of high, middle, low and ultra-low frequencies (bands), each driven by a dedicated power amp. The 4- way network mode provides network and time alignment functions. These two functions are essential for a multi-amp, multi-speaker sys- tem to enable precise control over settings for each frequency range.

Important

Even when the battery is disconnected or the mi- croprocessor is reset, this unit’s audio setting re- mains in the memory. If you want to reset the audio setting, refer to Resetting the audio func- tions on page 38.

Note

If one subwoofer is used with this system, left and right channel adjustment values, such as time alignment and network settings, need to be the same.

Adjusting the audio easily

By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field effortlessly.

1Using the position selector (POSI)

2Auto TA and EQ (auto-time alignment and auto- equalizing)

3Using balance adjustment on the next page (BAL)

Adjusting the audio finely

By carrying out the following settings/adjust- ments in the order shown, you can create a fi- nely-tuned sound field.

1Adjusting the time alignment (TA2)

2Adjusting network (NW 1, NW 2, NW 3)

3Fine-adjusting equalizer curve (EQ 2)

These functions are helpful in adjusting the sound to suit your system or your personal preferences.

!Recalling or copying equalizer curves (EQ 1)

!Adjusting loudness (LOUD)

!Using the sound retriever (S.Rtrv)

!Adjusting source levels (SLA)

Introduction of audio adjustments

1Audio display

Shows the audio adjustment status.

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se- lect.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL to switch between the audio functions in the following order.

BAL (balance adjustment)—POSI (position se- lector)—NW 1 (network adjustment 1)—NW 2 (network adjustment 2)—NW 3 (network ad- justment 3)—TA1 (time alignment setting)— TA2 (time alignment adjusting)—EQ 1 (copy- ing/recalling the equalizer)—EQ 2 (31-band graphic equalizer)—A.EQ (auto-equalizer on/ off)—S.Rtrv (advanced sound retriever)— LOUD (loudness)—SLA (source level adjust-

ment)

# When selecting FM as the source, you cannot

switch to SLA.

# When selecting FLAT in EQ 1, you cannot

switch to EQ 2.

# When selecting OFF in TA1, you cannot

switch to TA2.

# To return to the display of each source, press B.

24 En

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DEX-P99RS Contents Before You Start Information to UserAbout this unit About this manual Playing tracks in random orderCopying the equalizer curve Fine-adjusting equalizer curve Setting the speakers Setting the clockSetting the door mute setting Setting the AUX titleSwitching the seek mode Switching the reception modeSpecifications Before You Start Information to UserFor Canadian model About this unitAfter-sales service for Pioneer products FeaturesVisit our website Resetting the microprocessor Before You Start Protecting your unit from theftAttaching the front panel Removing the front panelBefore You Start Reverse mode Installing and removingBattery Using the remote control Use and care of the remoteBefore You Start Steering remote control Operating this unit What’s whatHead unit MULTI-CONTROLPower ON/OFF Operating this unitBasic Operations Selecting a sourceAdjusting the volume Loading a discOperating this unit Tuner Basic OperationsStoring and recalling broadcast frequencies Introduction to advanced operationsTuning in strong signals Built-in CD PlayerStoring the strongest broadcast Frequencies Displaying text information on disc Selecting tracks from the track title listSelecting files from the file name list Selecting a repeat play rangePlaying tracks in random order Pausing playback Using disc title functionsUsing MULTI-CONTROL Scanning folders and tracksOperating this unit Playing songs in a USB Storage deviceDisplaying text information of an audio file Function and operation Function name OperationOperating this unit Playing songs on iPod Browsing for a songSearching songs by category Displaying text information on iPod Searching by alphabet in the listPlaying songs in a random order shuffle Playing all songs in a random order shuffle allPlaying songs related to the currently playing song Operating this unit’s iPod function from your iPodChanging audiobook speed Audio Adjustments Operation modes Introduction of audio adjustmentsAdjusting the audio easily Adjusting the audio finelyAudio Adjustments Switching left and right channel Using balance adjustmentUsing the position selector About the network functionAudio Adjustments Adjustable parametersPoints concerning network adjustments Adjusting network Muting the speaker unit filterUsing the time alignment Press B to cancel the network adjust- ment modeAdjusting the time alignment Recalling or copying equalizer curvesRecalling the equalizer curve Fine-adjusting equalizer curve Using the auto-equalizerCopying the equalizer curve Adjusting source levels Using the sound retrieverAdjusting loudness Auto TA and EQ auto-time alignment and auto- equalizingBefore operating the auto TA and EQ function Carrying out auto TA and EQ 34 En Initial Settings Adjusting initial settings Setting the speakersSelecting the display language Initial Settings Switching the face auto openSetting the clock Switching the warning toneAdjusting the brightness Adjusting the illumination colorSetting the illumination interlock Selecting the illumination colorInitial Settings Correcting distorted sound Setting the polarityResetting the audio functions Switching the sound muting/attenuationSwitching the reverse mode Switching the ever scrollEntering PIN code for Bluetooth wireless connection Activating the BT Audio sourceDisplaying system version for repair Other Functions Using the AUX source Turning the clock display on or offOther Functions Using the external unit Using differentUsing the DF direct function button Entertainment displaysOther Functions Available accessories XM tuner Available accessories Sirius Satellite Radio tunerDisplaying the Radio ID Listening to Sirius Satellite RadioSwitching the Sirius display Storing and recalling broadcast stationsIntroduction of advanced operations Selecting the Sirius channel select mode Using the Game Alert functionSwitching the Game Alert on or off Selecting teams for Game AlertUsing Instant Replay function When the game of the selected team startsDisplaying game information Available accessories HD Radioä tuner Switching the displayMULTI-CONTROL left or right Switching the seek mode Switching the reception modeTo return to the playback display, press B ON-OFFBluetooth Audio To Browsing for a song onTurn to change the menu option. Press to se- lect Some countries, CD-BTB200 is not sold on the marketFunction and operation Device nameConnecting a Bluetooth audio player Playing songs on a Bluetooth audio playerDisconnecting a Bluetooth audio player Displaying BD Bluetooth Device addressBluetooth Telephone Setting up for hands-free phoning# Pushing MULTI-CONTROL right returns to the device name Clock display Shows the time if connected with a phoneMaking a phone call Taking a phone callVoice recognition Answering or rejecting an incoming callConnecting a cellular phone Searching for available cellular phonesDisconnecting a cellular phone Using a cellular phone to initiate a connectionRegistering a connected cellular phone Deleting a registered phoneUsing the phone book Connecting to a registered cellular phoneCalling a number in the phone book Editing the name of a Phone Book entryActers Using the call history Editing phone numbersClearing a phone book entry Making a call by entering phone number Clearing memoryTailed list Echo canceling and noise reduction Basic Operations Setting automatic rejectingSetting automatic answering Switching the ring toneUsing CD Text functions Using compression and bass emphasis Using ITS playlistsPlayback from your ITS playlist Creating a playlist with ITS programmingErasing a CD from your ITS playlist Displaying disc titlesSelecting discs from the disc title list DVD Player Random play-Scan mode scan play- Pause pause ITS memo ITS input-TitleInput a disc title inputIf you select other discs during repeat play Ing Track repeat, the repeat play rangeAdditional Information Error messages When you contact your dealer or your nearestPioneer Service Center, be sure to have Error message recordedUnderstanding auto TA and EQ error messages Additional InformationAdditional Information Handling guideline of discs PlayerDualDiscs Handling guideline of USB storage device and this unitCompressed audio compatibility disc, USB Compressed audio files on the discSupplemental information of compressed audio disc, USB Additional Information Compressed audio files USB storage deviceExample of a hierarchy and playback sequences IPodAbout iPod settings Copyright and trademark noticeAbout handling the iPod 74 En Additional Information Specifications GeneralAudio/DSP FM tuner AM tunerCD player USBMeguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan Ksnzf 09D00000
Top Page Image Contents