
Audio Adjustments
# If auto TA and EQ has not been carried out, | Adjusting source levels | |
Please Set Auto EQ appears. This indicates that | SLA (source level adjustment) lets you adjust | |
you cannot turn this function on. | ||
the volume level of each source to prevent ra- | ||
| ||
2 Press | dical changes in volume when switching be- | |
equalizer on. | tween sources. | |
# To turn | ! Settings are based on the FM volume level, | |
which remains unchanged. | ||
| 1 Compare the FM volume level with the | |
Using the sound retriever | level of the source you wish to adjust. | |
|
Section
03
Audio Adjustments
The sound retriever function automatically en- hances compressed audio and restores rich sound.
1Use
Refer to Introduction of audio adjustments on page 24.
2Press
OFF
# MODE1 is effective for the low compression
rate.
# MODE2 is effective for the high compression
rate.
# This function can be used for the audio data
stored in a CD, DVD, Bluetooth Audio, iPod, USB or AUX.![]()
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1Use
Refer to Introduction of audio adjustments on page 24.
2Press
on.
# To turn loudness off, press ![]()
2Use
Refer to Introduction of audio adjustments on page 24.
3Push
Each time
Notes
!The AM volume level can also be adjusted with source level adjustments.
!The
!External unit 1 and external unit 2 are set to
the same source level adjustment volume automatically. ![]()
Auto TA and EQ (auto-time alignment and auto- equalizing)
The
The
En
31![]()