Section
03Audio Adjustments
8Press
Each press of
Front left (front
9Turn
Select N/W mode in the auto TA and EQ menu.
10Press
Each press of
Auto N/W
# If you want to carry out auto TA and EQ based on previously customized network settings, select
Custom N/W. Otherwise, select Auto N/W.
# If manually adjusted value is not suitable for the actual specifications of the speakers, auto- time alignment and
11Turn
Auto TA & EQ stop in the auto TA and EQ menu.
12Press
13Get out of the car and close the door within 10 seconds when the
The measurement tone (noise) is outputted from the speakers, and auto TA and EQ be-
gins.
# To stop auto TA and EQ, press
# To cancel auto TA and EQ part way through, press B.
14When auto TA and EQ is completed, Complete is displayed.
When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under-
standing auto TA and EQ error messages on page 69.)
15Press B to cancel the auto TA and EQ mode.
16Store the microphone carefully in the glove compartment.
Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction.
Note
Make sure you have disconnected the micro- phone before pressing h/Open to open or close the panel (an alert sounds if the mic is still con- nected).