Section
06Available accessories
Note
To return to the playback display, press B.
Switching the seek mode
There are two method of seek tuning settings, one is Seek HD (Digital broadcasting stations
1 Song number indicator
seek) and the other is Seek ALL (normal seek).
2 Voltage indicator
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
Seek
Switching the reception mode
If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broad- cast automatically. If this function is off, recep- tion will be conducted within an analog broadcast.
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
vorite setting.
ON—OFF
Shows the battery voltage.
!The level displayed on the voltage indi-
cator may differ from the actual voltage level.
3Play time indicator
4Song time (progress bar)
%Fast forward or reverse
Push and hold
%Select a track
Push
Notes
!Read the precautions for iPod in the following section. Refer to page 72.
!If an error message is displayed, refer to Error messages on page 68.
!When the ignition switch is set to ACC or ON, the iPod’s battery is charged while the iPod is connected to this unit.
!While the iPod is connected to this unit, the iPod cannot be turned on or off.
!Before connecting the iPod to this unit, dis- connect the headphones from the iPod.
!The iPod is turned off about two minutes after the ignition switch is set to OFF.
Playing songs on iPod
Basic operation
You can use this unit to control an interface adapter for iPod (e.g.
50 En