Pioneer DEX-P99RS operation manual Fine-adjusting equalizer curve, Using the auto-equalizer

Page 30

Section

03Audio Adjustments

2Push MULTI-CONTROL left or right to select the equalizer curve you want to re- call.

Each time MULTI-CONTROL is pushed left or right, equalizer curve is recalled in the follow- ing order.

MEMORY1 (memory 1)—MEMORY2 (mem- ory 2)—MEMORY3 (memory 3)—MEMORY4 (memory 4)—MEMORY5 (memory 5)—FLAT

(flat)

# When FLAT is selected, no supplement or cor- rection is made to the sound. This is useful to check the effect of the equalizer curves by switch- ing alternatively between FLAT and a set equali- zer curve.

Copying the equalizer curve

1Use MULTI-CONTROL to select EQ 1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Push MULTI-CONTROL left or right to select the equalizer curve you want to copy.

3Press MULTI-CONTROL and hold to copy the selected equalizer curve.

4Push MULTI-CONTROL left or right to select the storage area (MEMORY1 to MEMORY5).

5Press MULTI-CONTROL and hold to store the equalizer curve.

Fine-adjusting equalizer curve

You can perform 31–band level adjustment to achieve the optimum acoustic characteristics for your vehicle’s interior environment.

1Select the storage area (MEMORY1 to MEMORY5).

Refer to Copying the equalizer curve on this page.

#If an equalizer curve has already been stored in memory, it will be overwritten by the newly ad- justed equalizer curve.

2Use MULTI-CONTROL to select EQ 2 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

3Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order.

20Hz—25Hz—31.5Hz—40Hz—50Hz—63Hz

—80Hz—100Hz—125Hz—160Hz—200Hz— 250Hz—315Hz—400Hz—500Hz—630Hz— 800Hz—1k—1.25k—1.6k—2kHz—2.5k— 3.15k—4k—5k—6.3k—8k—10k—12.5kHz— 16k—20k

4Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band in- creases or decreases.

+12 to –12 is displayed as the level is in-

creased or decreased.

# You can then select another band and adjust the level.

5Equalizer curve is automatically stored in memory.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre- ated by auto TA and EQ (refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on the next page).

You can turn the auto-equalizer on or off.

1Use MULTI-CONTROL to select A.EQ in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

30 En

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DEX-P99RS About this unit About this manual ContentsBefore You Start Information to User Playing tracks in random orderSetting the door mute setting Copying the equalizer curve Fine-adjusting equalizer curveSetting the speakers Setting the clock Setting the AUX titleSwitching the seek mode Switching the reception modeSpecifications For Canadian model Before You StartInformation to User About this unitAfter-sales service for Pioneer products FeaturesVisit our website Attaching the front panel Resetting the microprocessorBefore You Start Protecting your unit from theft Removing the front panelBattery Using the remote control Before You Start Reverse modeInstalling and removing Use and care of the remoteBefore You Start Head unit Steering remote controlOperating this unit What’s what MULTI-CONTROLBasic Operations Power ON/OFFOperating this unit Selecting a sourceAdjusting the volume Loading a discStoring and recalling broadcast frequencies Operating this unit TunerBasic Operations Introduction to advanced operationsTuning in strong signals Built-in CD PlayerStoring the strongest broadcast Frequencies Displaying text information on disc Selecting tracks from the track title listSelecting files from the file name list Selecting a repeat play rangePlaying tracks in random order Using MULTI-CONTROL Pausing playbackUsing disc title functions Scanning folders and tracksOperating this unit Playing songs in a USB Storage deviceDisplaying text information of an audio file Function and operation Function name OperationOperating this unit Playing songs on iPod Browsing for a songSearching songs by category Displaying text information on iPod Searching by alphabet in the listPlaying songs related to the currently playing song Playing songs in a random order shufflePlaying all songs in a random order shuffle all Operating this unit’s iPod function from your iPodChanging audiobook speed Adjusting the audio easily Audio Adjustments Operation modesIntroduction of audio adjustments Adjusting the audio finelyUsing the position selector Audio Adjustments Switching left and right channelUsing balance adjustment About the network functionAudio Adjustments Adjustable parametersPoints concerning network adjustments Adjusting network Muting the speaker unit filterUsing the time alignment Press B to cancel the network adjust- ment modeAdjusting the time alignment Recalling or copying equalizer curvesRecalling the equalizer curve Fine-adjusting equalizer curve Using the auto-equalizerCopying the equalizer curve Adjusting loudness Adjusting source levelsUsing the sound retriever Auto TA and EQ auto-time alignment and auto- equalizingBefore operating the auto TA and EQ function Carrying out auto TA and EQ 34 En Initial Settings Adjusting initial settings Setting the speakersSelecting the display language Setting the clock Initial SettingsSwitching the face auto open Switching the warning toneSetting the illumination interlock Adjusting the brightnessAdjusting the illumination color Selecting the illumination colorResetting the audio functions Initial Settings Correcting distorted soundSetting the polarity Switching the sound muting/attenuationEntering PIN code for Bluetooth wireless connection Switching the reverse modeSwitching the ever scroll Activating the BT Audio sourceDisplaying system version for repair Other Functions Using the AUX source Turning the clock display on or offUsing the DF direct function button Other Functions Using the external unitUsing different Entertainment displaysOther Functions Available accessories XM tuner Displaying the Radio ID Available accessoriesSirius Satellite Radio tuner Listening to Sirius Satellite RadioSwitching the Sirius display Storing and recalling broadcast stationsIntroduction of advanced operations Switching the Game Alert on or off Selecting the Sirius channel select modeUsing the Game Alert function Selecting teams for Game AlertUsing Instant Replay function When the game of the selected team startsDisplaying game information Available accessories HD Radioä tuner Switching the displayMULTI-CONTROL left or right To return to the playback display, press B Switching the seek modeSwitching the reception mode ON-OFFTurn to change the menu option. Press to se- lect Bluetooth AudioTo Browsing for a song on Some countries, CD-BTB200 is not sold on the marketFunction and operation Device nameDisconnecting a Bluetooth audio player Connecting a Bluetooth audio playerPlaying songs on a Bluetooth audio player Displaying BD Bluetooth Device address# Pushing MULTI-CONTROL right returns to the device name Bluetooth TelephoneSetting up for hands-free phoning Clock display Shows the time if connected with a phoneVoice recognition Making a phone callTaking a phone call Answering or rejecting an incoming callConnecting a cellular phone Searching for available cellular phonesRegistering a connected cellular phone Disconnecting a cellular phoneUsing a cellular phone to initiate a connection Deleting a registered phoneUsing the phone book Connecting to a registered cellular phoneCalling a number in the phone book Editing the name of a Phone Book entryActers Using the call history Editing phone numbersClearing a phone book entry Making a call by entering phone number Clearing memoryTailed list Setting automatic answering Echo canceling and noise reductionBasic Operations Setting automatic rejecting Switching the ring toneUsing CD Text functions Playback from your ITS playlist Using compression and bass emphasisUsing ITS playlists Creating a playlist with ITS programmingErasing a CD from your ITS playlist Displaying disc titlesSelecting discs from the disc title list DVD Player If you select other discs during repeat play Random play-Scan mode scan play- Pause pauseITS memo ITS input-TitleInput a disc title input Ing Track repeat, the repeat play rangePioneer Service Center, be sure to have Additional Information Error messagesWhen you contact your dealer or your nearest Error message recordedUnderstanding auto TA and EQ error messages Additional InformationDualDiscs Additional Information Handling guideline of discsPlayer Handling guideline of USB storage device and this unitCompressed audio compatibility disc, USB Compressed audio files on the discSupplemental information of compressed audio disc, USB Example of a hierarchy and playback sequences Additional Information Compressed audio filesUSB storage device IPodAbout iPod settings Copyright and trademark noticeAbout handling the iPod 74 En Additional Information Specifications GeneralAudio/DSP CD player FM tunerAM tuner USBMeguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan Ksnzf 09D00000
Top Page Image Contents