| Section |
Available accessories | 06 |
|
|
%Press B repeatedly to select the desired channel select setting.
Channel number (channel number select set-
setting)
# If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.
Note
You can also perform this operation in the menu that appears by using
Selecting a channel in the channel category
1Switch the channel select settings to Category.
Refer to Selecting the XM channel select mode on the previous page.
2Push
3Push
Displaying the Radio ID
Channel number select setting
1Select the channel select settings to Channel number.
Refer to Selecting the XM channel select mode on the previous page.
2Push
select RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying RADIO ID and the ID code one after the other.
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satel- lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation man- ual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR- IUS operation manual.
1SIRIUS band indicator
2SIRIUS channel number indicator
3SIRIUS preset number indicator
4SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when
Channel number is selected, and CAT is dis- played when Category is selected.
I.R is displayed during the Instant Replay mode.
5Voltage indicator
Shows the battery voltage.
!The level displayed on the voltage indi- cator may differ from the actual voltage level.
6SIRIUS channel name
Shows the channel name of broadcast channel.
%Select a SIRIUS band.
Press B.
# Band can be selected from SR1, SR2 or SR3.
%Select a channel.
Push
Available accessories
En 45