| Section |
Operating this unit | 02 |
|
|
Scanning folders and tracks
Scan play searches the song within the se- lected repeat range.
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
on.
The first 10 seconds of each track is played.
3When you find the desired track press
# If the display has automatically returned to the playback display, select Scan mode again by
using MULTI-CONTROL.
# After scanning of a disc (folder) is finished, normal playback of the tracks begins.
Pausing playback
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
on.
Playback of the current track pauses.
# To turn pause off, press
Using disc title functions
You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD is dis- played.
Entering disc titles
Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long.
1Play the CD that you want to enter a title for.
2Use
3Press D/Scrl to select the desired charac- ter type.
Press D/Scrl repeatedly to switch between the following character types:
Alphabet (upper case), numbers and symbols
4Push
5Push
6Move the cursor to the last position by pushing
When you push
7Press B to return to the playback dis- play.
Notes
!Titles remain in memory, even after the disc is removed from the unit, and are recalled when the disc is reinserted.
!After data for 48 discs are stored in the mem- ory, data for a new disc overwrites the oldest one.
!If you connect a
!When a
disc title functions is connected, you cannot enter disc titles in this unit.
Operating this unit
En 17