Pioneer DEX-P99RS Recalling or copying equalizer curves, Adjusting the time alignment

Page 29

 

Section

Audio Adjustments

03

 

 

2Push MULTI-CONTROL left or right to select the time alignment.

Each time MULTI-CONTROL is pushed left or right, time alignment is selected in the follow- ing order:

Initial (initial)—Custom (custom)—AutoTA (auto-time alignment)—OFF (off)

!Initial is the factory supplied time align- ment.

!Custom is an adjusted time alignment that you created.

!AutoTA is the time alignment created by

auto TA and EQ. (Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 31.)

#You cannot select AutoTA if auto TA and EQ has not been carried out. In this case, Please Set Auto TA appears.

Adjusting the time alignment

You can adjust the distance between each speaker and the selected position.

!An adjusted time alignment is memorized in Custom.

1Use MULTI-CONTROL to select TA1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

2Press MULTI-CONTROL to select a unit of distance.

Each press of MULTI-CONTROL selects the unit of distance in the following order: (cm) (centimeter)—(inch) (inch)

3Use MULTI-CONTROL to select TA2 in the audio function menu.

Refer to Introduction of audio adjustments on

page 24.

# Can't Adjust TA. Set POS. FL or FR appears when neither Left nor Right is selected in the po-

sition selector mode (POSI).

# When selecting OFF in TA1, you cannot switch to TA2.

4Push MULTI-CONTROL left or right to select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order:

High L (high-range left)—High R (high-range right)—Mid L (middle-range left)—Mid R (middle-range right)—Low L (low-range left)— Low R (low-range right)—SW L (subwoofer left)—SW R (subwoofer right)

5Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases. 394.75cm to 0.00cm is displayed as the dis- tance is increased or decreased, if you have selected centimeters ((cm)).

155.39inch to 0.00inch is displayed as the dis- tance is increased or decreased, if you have

selected inches ((inch)).

# You can adjust the distance for the other speakers in the same way.

6Press B to cancel the time alignment mode.

Recalling or copying equalizer curves

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

It is possible to store the adjusted equalizer curve in the memory, or recall the stored equalizer curve from the memory.

Recalling the equalizer curve

1Use MULTI-CONTROL to select EQ 1 in the audio function menu.

Refer to Introduction of audio adjustments on page 24.

Audio Adjustments

En 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DEX-P99RS Before You Start Information to User ContentsAbout this unit About this manual Playing tracks in random orderSetting the speakers Setting the clock Copying the equalizer curve Fine-adjusting equalizer curveSetting the door mute setting Setting the AUX titleSpecifications Switching the seek modeSwitching the reception mode Information to User Before You StartFor Canadian model About this unitVisit our website After-sales service for Pioneer productsFeatures Before You Start Protecting your unit from theft Resetting the microprocessorAttaching the front panel Removing the front panelInstalling and removing Before You Start Reverse modeBattery Using the remote control Use and care of the remoteBefore You Start Operating this unit What’s what Steering remote controlHead unit MULTI-CONTROLOperating this unit Power ON/OFFBasic Operations Selecting a sourceLoading a disc Adjusting the volumeBasic Operations Operating this unit TunerStoring and recalling broadcast frequencies Introduction to advanced operationsStoring the strongest broadcast Frequencies Tuning in strong signalsBuilt-in CD Player Selecting tracks from the track title list Displaying text information on discPlaying tracks in random order Selecting files from the file name listSelecting a repeat play range Using disc title functions Pausing playbackUsing MULTI-CONTROL Scanning folders and tracksDisplaying text information of an audio file Operating this unit Playing songs in a USBStorage device Function name Operation Function and operationSearching songs by category Operating this unit Playing songs on iPodBrowsing for a song Searching by alphabet in the list Displaying text information on iPodPlaying all songs in a random order shuffle all Playing songs in a random order shufflePlaying songs related to the currently playing song Operating this unit’s iPod function from your iPodChanging audiobook speed Introduction of audio adjustments Audio Adjustments Operation modesAdjusting the audio easily Adjusting the audio finelyUsing balance adjustment Audio Adjustments Switching left and right channelUsing the position selector About the network function Points concerning network adjustments Audio Adjustments Adjustable parameters Muting the speaker unit filter Adjusting networkPress B to cancel the network adjust- ment mode Using the time alignmentRecalling the equalizer curve Adjusting the time alignmentRecalling or copying equalizer curves Copying the equalizer curve Fine-adjusting equalizer curveUsing the auto-equalizer Using the sound retriever Adjusting source levelsAdjusting loudness Auto TA and EQ auto-time alignment and auto- equalizingBefore operating the auto TA and EQ function Carrying out auto TA and EQ 34 En Selecting the display language Initial Settings Adjusting initial settingsSetting the speakers Switching the face auto open Initial SettingsSetting the clock Switching the warning toneAdjusting the illumination color Adjusting the brightnessSetting the illumination interlock Selecting the illumination colorSetting the polarity Initial Settings Correcting distorted soundResetting the audio functions Switching the sound muting/attenuationSwitching the ever scroll Switching the reverse modeEntering PIN code for Bluetooth wireless connection Activating the BT Audio sourceDisplaying system version for repair Turning the clock display on or off Other Functions Using the AUX sourceUsing different Other Functions Using the external unitUsing the DF direct function button Entertainment displaysOther Functions Available accessories XM tuner Sirius Satellite Radio tuner Available accessoriesDisplaying the Radio ID Listening to Sirius Satellite RadioIntroduction of advanced operations Switching the Sirius displayStoring and recalling broadcast stations Using the Game Alert function Selecting the Sirius channel select modeSwitching the Game Alert on or off Selecting teams for Game AlertDisplaying game information Using Instant Replay functionWhen the game of the selected team starts MULTI-CONTROL left or right Available accessories HD Radioä tunerSwitching the display Switching the reception mode Switching the seek modeTo return to the playback display, press B ON-OFFTo Browsing for a song on Bluetooth AudioTurn to change the menu option. Press to se- lect Some countries, CD-BTB200 is not sold on the marketDevice name Function and operationPlaying songs on a Bluetooth audio player Connecting a Bluetooth audio playerDisconnecting a Bluetooth audio player Displaying BD Bluetooth Device addressSetting up for hands-free phoning Bluetooth Telephone# Pushing MULTI-CONTROL right returns to the device name Clock display Shows the time if connected with a phoneTaking a phone call Making a phone callVoice recognition Answering or rejecting an incoming callSearching for available cellular phones Connecting a cellular phoneUsing a cellular phone to initiate a connection Disconnecting a cellular phoneRegistering a connected cellular phone Deleting a registered phoneConnecting to a registered cellular phone Using the phone bookActers Calling a number in the phone bookEditing the name of a Phone Book entry Clearing a phone book entry Using the call historyEditing phone numbers Tailed list Making a call by entering phone numberClearing memory Basic Operations Setting automatic rejecting Echo canceling and noise reductionSetting automatic answering Switching the ring toneUsing CD Text functions Using ITS playlists Using compression and bass emphasisPlayback from your ITS playlist Creating a playlist with ITS programmingSelecting discs from the disc title list Erasing a CD from your ITS playlistDisplaying disc titles DVD Player ITS memo ITS input-TitleInput a disc title input Random play-Scan mode scan play- Pause pauseIf you select other discs during repeat play Ing Track repeat, the repeat play rangeWhen you contact your dealer or your nearest Additional Information Error messagesPioneer Service Center, be sure to have Error message recordedAdditional Information Understanding auto TA and EQ error messagesPlayer Additional Information Handling guideline of discsDualDiscs Handling guideline of USB storage device and this unitSupplemental information of compressed audio disc, USB Compressed audio compatibility disc, USBCompressed audio files on the disc USB storage device Additional Information Compressed audio filesExample of a hierarchy and playback sequences IPodAbout handling the iPod About iPod settingsCopyright and trademark notice 74 En Audio/DSP Additional Information SpecificationsGeneral AM tuner FM tunerCD player USBKsnzf 09D00000 Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan
Top Page Image Contents