BASIC OPERATION
POWER ON/OFF
■Press the [POWER/MUTE] button on the front panel to turn the unit on
■Press the [POWER/MUTE] button on the front panel for more than 2 sec to turn the unit off
MUTE CONTROL
■When the unit is turned on, press the [POWER/MUTE] button on the front panel to mute the sound; press this button once more to exit MUTE mode.
MODE SWITCH
■Press the [MODE] button repeatedly to switch between the following modes:
■Tuner 
DVD 
CDC 
AUX 
Tuner
Note:
In the following case, the source mode will not change:
■When no disc is loaded into the headunit, the DVD mode is invalid.
■When no magazine is loaded into the
SWITCH THE DISPLAY MODES
■Press the [DISP] button repeatedly, to check out different displays on the on the LCD screen, according to the following sequence. After 5 sec, the display will turn back to the default display of the current mode automatically.
Tuner: frequency (default) 
clock
CDC: play time (default) 
clock
DVD: play time (default) 
disc type 
clock
AUX: AUX 
clock
Note:
■When the unit is in standby state, only the current time will be displayed on the LCD, if the clock display is enabled.
SET CLOCK
■If the current display mode is set to clock mode, pressing the button [DISP] for a little longer will put the unit into clock set mode.
In clock set mode:
■Pressing the [DISP] button will switch between Hour and Minute setting.
■Pressing the [
] button will increase time data.
■Pressing the [
] button will decrease time data.
Note:
■If there no operation within 5 sec, the device will quit clock set mode.
SYSTEM SETUP
■When the unit has been turned on, and the current display mode isn’t set to clock mode, pressing the [DISP] button a little longer will activate the system setup mode.
■Press the [
] and [
] buttons to select the item you want to adjust, then use the [DISP] button to select a value and apply.
13