Blaupunkt RCM 104 DSC programming, Skipping unrecorded tape sec- tions with BLS Blank Skip

Skipping unrecorded tape sec- tions with BLS - Blank Skip

As soon as the system detects a blank tape section of more than 15 seconds, the casset- te will automatically be fast forwarded to the beginning of the next track.

The display will then show “CPS-FF”. To switch BLS on/off:

•Press BLS.

If the function is active, “BLS” appears in the display.

Listening to the radio during fast winding with RM (Radio Monitor)

When the tape is fast forwarded or rewound (also with CPS, SCAN, BLS), the radio is normally muted. To listen to the radio during fast winding:

•Press RM.

“RM” lights up in the display.

Care of your audio equipment

We recommend that you use only C-60/C-90 cassette tapes in your car radio. Store your cassettes in a cool place away from dirt, dust and temperatures exceeding 50 ° C. During cold weather, allow very cold cassettes to warm up before playing them in order to avoid uneven tape transport. Operating pro- blems and sound distortions may occur after approximately 100 hours of playing time and are caused by dust particles which adhere to the rubber roller and the audio head.

Use a cleaner cassette to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-tip) soaked with alcohol. Do not attempt to clean the mechanism by inserting a hard object into the player!

DSC programming	DEUTSCH
Using DSC (Direct Software Control), you
can adjust certain settings and functions for
this car radio to your own liking and then store
them.	ENGLISH
The basic settings for this audio equipment
have been made at the factory. Please refer
to the following overview for these settings so
that you can always reset to these if desired.	AIS
If you wish to alter any of the programming,
	FRANÇ
• press button DSC.

Use the rocker switch and the -dBbutton to
make your selection from	the following	ITALIANO
functions and to carry out the desired adjust-
ments. The current setting for that function
will appear in the display.
Select function		NEDERLAND
Set	Set
		SVENSKA
value	value
Select function
		ESPAGÑOL
		PORTUGUES

41