Blaupunkt RCM 104 Tape side selector, Mix, To change the seek tuning sensitivi

BTape side selector

Press to switch over during tape operation. The display shows “TR 1” (track) or “TR 2”.

CMIX

see chapter “CD changer control”.

DBLS (Blank Skip)

Use this function to skip blank sections of the tape.

As soon as an unrecorded portion of more than 15 seconds is detected du- ring playback, the system will automati- cally forward the tape to the beginning of the next title.

In this case, the display will show “CPS-FF”.

To switch BLS on/off: Press the BLS button.

When the function is active, “BLS” will light up in the display.

Elo

To change the seek tuning sensitivity. lo lit up in the display indicates normal seek tuning sensitivity (the system will pick up all powerful, nearby stations). lo off indicates high seek tuning sensiti- vity (the system will also pick up wea- ker stations).

To change the seek tuning sensitivi-

ty: Press lo.

FDSC (Direct Software Control)

Use the DSC function to adapt a num- ber of programmable basic settings to suit your listening preference. For more information, read through chapter “DSC programming”.

GLD (loudness)

Use this function to boost the low fre- quencies for more bass, especially at low volume levels.

To switch LD on/off: Press the button. For more information, see chapter “DSC programming”.

HAUD

To adjust the treble and bass frequen- cies using the rocker button.

Treble

+

Fader front

ITALIANO