Blaupunkt RCM 104 operating instructions Entering/displaying CD names, Deleting CD names

Page 23

Entering/displaying CD names

With this system you can name up to 99 CDs. When playing a CD, the dis play will then give you the entered name, for example

“VIVALDI”.

Precondition: NAME must be selected under

DSC - CD DISP.

To enter the name:

First, switch off the priority for traffic an- nouncements. Otherwise the entry will be deleted if an announcement is broadcast. Press the TA button to switch the “TA” dis- play off.

Be sure that at least one CD is inserted in the CD magazine.

Press SRC to change to CDC.

Press DSC.

Press the rocker switch / until “CD NAME” is displayed.

Press the -dBbutton.

The first character position is flashing.

Use the rocker switch / to enter the first letter, special character or digit from 0-9.

Use the rocker switch <<>> to change to the next position and select a cha- racter.

Each name may have up to 7 characters.

To finish the entry:

Press -dB. The entry is stored and you can now select another DSC function using the rocker switch /.

Alternatively:

Press DSC. The entry is stored and the DSC mode is automatically quit.

To store the entry/choose the next CD:

Press -dBand select the next CD to be named using <<>>.

Press -dBand enter a name.

Any specified name will be deleted by re- assigning it with a new CD name.

Deleting CD names

If you try to store more than 99 CD names, “FULL” will be shown in the display. In this case you can use DSC to delete the name of one or more CDs in order to get new memory capacity.

Use the CDC-UPD function to confirm all CDs, the names of which you wish to main- tain. All the other names will be deleted.

Press DSC.

Insert a magazine with the CDs, the names of which you wish to maintain.

Press / until “CDC UPD” is display- ed.

Press <<>> and “LOAD CD” is display- ed.

After having read in the CDs of this magazi- ne, “NEXT MAG” appears in the display.

Press the EJECT button on the CD changer and insert the next magazine.

Repeat these steps for all CDs, the names of which you wish to maintain.

To finish your entry, press -dBfor about 2 sec. until “UPDATING” is dis- played. The updating process is com- pleted when the display shows “READY”.

The names of all CDs inserted in the maga- zine remain stored in the memory. The other CD names have been deleted.

You can interrupt this process by pressing DSC.

DEUTSCH

ENGLISH

PORTUGUES ESPAGÑ OL SVENSKA NEDERLAND ITALIANO FRANÇ AIS

45

Image 23
Contents Frankfurt RCM 15 14 Table of contents FMT Switching onSwitching off Quick instructionsAUD DSC ModeAF Mode CPS? BC Dolby NR 3, 4, 5, 6 preset buttonsPTY button TIM/TAMIX To change the seek tuning sensitiviTape side selector What you really have to read Traffic safetyInstallation/connection Important notesKeyCard Selecting the operating modeSpeech programs, Beep volume, SCANTI- ME, Volfix Insert KeyCard 1 and switch the radio onREG Regional Automatic seek tuningRadio operation with RDS Radio Data System AF Alternative FrequencyStoring stations Adjusting the seek tuning sensi- tivityStereo mono switch FM Changing the memory bank FMScanning stations with Radio Scan Preset scanningRecalling stored stations Station naming Traffic announcement priority on/off Automatic seek tuning startAdjusting the traffic message volume Switching the warning beep offTraffic Memo TIM If you are sure Deactivating the TIM standby modeDo not switch on the radio until you have left the car wash Removing a tape RT RadiotextInserting a tape Scanning cassette titles Fast forward/rewindAutoreverse Tape type detectionCare of your audio equipment DSC programmingSkipping unrecorded tape sec- tions with BLS Blank Skip BAS F=R TimeCDC Name AngleScantime PTY LangPTY SET SpeechCD changer control option Switching the CD mode onUsing SRC of the car radio Selecting a CD/track using the rocker switchPrecondition Name must be selected under Entering/displaying CD namesDeleting CD names Appendix Survey of DSC default settingsTechnical data
Related manuals
Manual 20 pages 46.37 Kb