JRT – Radio text
Use this function to display message texts transmitted by an RDS station. RT messages will only be displayed if the ignition is switched off.
To switch RT on/off: Press RT.
KSRC (source)
To select between the connected audio sources, for example cassette, radio, or CD changer (option).
Important notes
What you really have to read
Before you operate your new car radio, plea- se read the following information carefully.
Traffic safety
As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you.
Please keep in mind that you travel a di- stance of 14 m per second at a speed of only 50 km/h.
Do not adjust your radio in difficult driving conditions that demand your full attention. Always make sure that you are still able to hear any warning signals coming from outsi- de of the vehicle, such as police or fire engine sirens, so that you can react accordingly.
Installation/connection
In order to ensure that the set functions properly it is necessary that the positive po- wer supply line is connected to the ignition and the permanent +12 V connector of the car radio.
If you would like to install your new car radio by yourself or add other audio components to
the existing ones, then please read carefully the enclosed instructions on installation and connection.
Do not connect the loudspeaker outputs to ground!
Use only the accessory and replacement parts approved by Blaupunkt.
Optical indication of theft protection
When the car is stationary, you can let the KeyCard tongue flash in order to indicate that the set is equipped with security coding. Use DSC to select one of two settings: LED ON or
LED OFF.
For more information, please read through chapter “DSC programming - LED ON/OFF”.
30