Blaupunkt RCM 126 Changing the scan time, To start Preset Scan, Off Preset Scan

Scanning stations with Radio- Scan

Automatically storing the	Scanning stored stations with
strongest stations with	Preset Scan
Travelstore	You can have all of the stored stations briefly
You can automatically store the six most	scanned on all wavebands.
powerful FM stations of your current recep-	To start Preset Scan:
tion area sorted according to their signal
	• Press SC for approximately two sec-
strength. This function is particularly con-
	onds.
venient on longer trips.
	All of the stored stations of the adjusted

•Press the FMT button for two seconds. waveband will be scanned one after the oth-

“T-STORE” will appear in the display.	er. The memory bank and preset position of
The six strongest FM stations will be auto-
	the currently scanned station will flash in the
matically stored on the memory bank “T” display.
(Travelstore). When this process has been	To select a scanned station and switch
completed, the radio will play the first sta-
	off Preset Scan:
tion.
	• Press SC briefly.
If desired, stations can also be stored
manually on the Travelstore bank (see “Stor-
ing stations”).

To select a scanned station and switch off the Radio-Scan function:

•Press SC briefly.

If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.

Changing the scan time

The scan time can be changed from be- tween five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”.

Selecting the seek tuning sensi- tivity

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

•Press the corresponding preset button briefly to recall the station.

	You can alter the automatic seek tuning
You can also scan all stations which can be	sensitivity.
	If “lo” is displayed, the radio will only pick up
received.
	strong, local stations (low sensitivity).
To start the Scan function:
	If “lo” does not light up, the radio will also
• Press SC briefly.	pick up weaker, distant stations (high sen-
The scanned frequency or the station name	sitivity).
will start flashing in the display. During the	The sensitivity level can be altered in both
actual scanning process “FM-SCAN” or	modes (see also chapter “DSC program-
“AM-SCAN” will be displayed.	ming”).

44