Blaupunkt RCM 126 operating instructions Tions with Blank Skip, Dolby BC NR

54

* Noise reduction system manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Listening to the radio during fast tape winding with RM

(Radio Monitor)

Use this button to play tapes recorded with Dolby noise reduction.

Dolby-C NR is a further development of Dol- by-B NR and reduces the unwanted tape noise even more.

Press B•C to adjust to the type of Dolby NR When the tape is fast forwarded or rewound in which the tape was recorded or to disen- (also with S-CPS), the radio will normally gage Dolby NR. When Dolby is active, the be muted. To listen to the radio during fast corresponding indicator “B” or “C” will lightwinding, activate the Radio Monitor function.

up.To switch RM on and off:

• Press RM.

When the function is active, “RM” will light up in the display.

Scanning cassette titles with	Skipping unrecorded tape por-	Care notes
SCAN	tions with Blank Skip	To avoid possible problems, we recommend
You can have the cassette titles played brief-	This function senses an unrecorded tape	you to use C-60/C-90 type cassette tapes
ly by using the scan function. If you like a	portion continuing for more than 15 seconds	only. Store your tapes in a cool place away
title, stop the scan to continue listening to	and automatically fast forwards the cas-	from dirt, dust and temperatures exceeding
that track.	sette to the beginning of the next track.	50 °Celsius. Allow very cold tapes to warm
To start/stop the scan function:	During fast tape winding, “B-SKIP” will be	up before playing them in order to avoid
	indicated on the display panel.	uneven tape transport. After approximately
• Press the SC button briefly.
	To switch the Blank Skip function on and	100 hours of use, dust particles collected
You can individually adjust the scan time in
		on the playback head or roller may lead to
the DSC menu (see “DSC programming - off:
		tape run problems and sound distortions.
SCANTIME”).	• Press the RM button for approximately
		Use a head cleaning tape to remove nor-
	one second until you hear a beep.
		mal dirt build-up. For tougher cases, use a
Dolby B•C NR*	When the function has been activated, “BLS”
		cotton swab (Q-Tip) soaked with alcohol. Do
	will appear in the display.	not attempt to clean by inserting a hard ob-

ject into the player!