Scan operation, To stop the Scan function

Selecting the display mode

You can select the desired display mode for			You can store your preferred display mode
CD operation:			which will then be active each time the ra-
“NAME”	–	The specified name, for	dio is switched on.
“NAME”	–	The specified name, for	If required,
		example “MADONNA”	If required,
		will be displayed.	• press DIS as many times until the de-
“TIME”	–	The elapsed playback		sired setting is displayed.
“TIME”	–	The elapsed playback
		time of the title is dis-	• Hold down the DIS button until you
		played, for example “2 :		hear a beep.
		32”.
“NUMBER”	–	The CD position in the	SCAN operation
		magazine (disc number)	Use this function to scan all of the CD tracks.
		is displayed, for example	Use this function to scan all of the CD tracks.
		is displayed, for example	To start the Scan function:
		“CD8 T5”.	To start the Scan function:
To switch the display mode:			•	Press SC.
• Press DIS during CD playback.			The titles will be scanned one after the oth-
The display mode and the corresponding			er in ascending order.
The display mode and the corresponding
setting or value will briefly show on the dis-			To stop the Scan function:
play panel, e.g. “TIME”, “2 : 32”.			•	Press SC briefly.

If you have selected “NAME” without hav- The track currently being scanned is con- ing specified a name for the corresponding tinued to be played.

disc, “CD PLAY” will appear in the display. SCAN will also be terminated by

Please read also the chapter “Entering CD •	pressing one of the buttons AUD,
names”.	GEO, DSC, SRC, , << >> or / .

You can name up to 99 discs.

The specified name (e.g. VIVALDI) will then appear in the display.

Be sure to select the display mode “NAME” using the DIS button.

To start the entry:

•Press the DSC button.

•Press / until “CDC-NAME” appears on the display panel.

•Press .

The first underscore character will flash.

•Select the first character with the help of the rocker switch /.

You have the choice between the capital letters A to Z, special characters and the numbers 0 to 9.

•Use the rocker switch << >> to move to the next underscore and select a character.

You can select up to seven characters. Once you have completed the name as de- sired:

•Press in order to store it.