GLD
Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range.
LD on/off: Press the button.
When the Loudness function is active, “LD” will light up in the display.
See chapter “DSC programming” for more information.
IGEO
To adjust the balance (left/right) and fader (front/rear) with the rocker switch.
JAUD
To adjust the treble and bass frequen- cies with the rocker switch.
HDSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings
to suit your personal needs and prefer- ences. See chapter “DSC program- ming” for more information.
Fader front
Fader rear
Balance left
Balance right
The last setting will be stored automat- ically.
To switch off GEO: Press button once again.
If the setting remains unchanged within four seconds, the display will switch back to the previous condition.
Extra function GEO
Separate balance and fader settings for traffic messages. See chapter “Ad- justing GEO for traffic messages and the warning beep”.
Treble +
Treble –
Bass –
Bass +
The last setting will be stored automat- ically.
To switch off AUD: Press button once again.
If the setting remains unchanged within four seconds, the AUD setting will be terminated automatically.
You can distribute the bass and treble level separately among the front and rear speakers.
For more information see “Program- ming with DSC, BAS/TRE”.
38