Blaupunkt RCM 126 Recalling stored traffic messag- es, Deactivating the TIM standby mode

51

Now the TIM standby mode is inactive. After having switched off the radio, the dis- play will go out immediately and a motor antenna will be pulled in.

If you wish to deactivate both timers, pro- ceed in the same way to switch the other timer to “TIM OFF” as well.

When “TIM OFF” is flashing,

• Then press the button and switch to “TIM OFF” by means of the rocker switch / (you will find this item be- tween the clock settings for 23:00 and 0:00).

• Use the rocker switch / to select “TIMER 1” or “TIMER 2”.

•Press / to set the timer.

•Press << to set the hours and >> to set the minutes.

Once you have completed the setting,

•press or DSC.

The clock setting for TIMER 1 has been stored.

Proceed in the same way to set the TIMER 2.

Recalling stored traffic messag- es

To repeat a message:

•Press once.

To select one of the older messages (e.g. to skip from T4 to T3):

•Press as many times as required. To select one of the more recent messages (e.g. to skip from T2 to T3):

•Press twice.

When keeping the left or right part of the rocker switch << >> depressed, the mes- sage text including its recording time will be played back quickly in forwards or back- wards direction.

Deactivating the TIM standby mode

The standby mode will be automatically switched off if the car radio is not turned on within 72 hours. Switching the set back on reactivates the standby function.

You can deactivate the TIM standby mode separately for TIMER 1 and TIMER 2.

•Press DSC when the radio is on.

ITALIANO FRANÇAIS ENGLISH DEUTSCH

• Press TIM briefly.	Press TIM to switch off the function.
For example, the display shows “NDR2”
(station name or frequency), followed by	TIM standby mode while the ra-
“T4 14.30” (T4 = 4th traffic message record-	dio is switched off
ed at 2:30 p.m.).	The TIM standby mode is active if the dis-
If four traffic messages have been record-
ed, T4 always represents the most recent	play shows “TIM ON” when switching off the •
bulletin which will also be played back first.	radio.
If the traffic memory is still empty, “NO TIM”	In this case the radio will record all traffic
will appear on the display panel.	bulletins broadcast by the tuned in station
If the display shows four dashes, the clock	for three hours after having turned off the •
has not been reset after the last interruption	set. During this period a motor antenna will
of the power supply.	remain extracted.
Use the rocker switch / to play back any	The set will also record the traffic informa-
	tion broadcast for 90 minutes before and
of the messages T1 to T4.
	after the programmed TIM times. During
	these periods a motor antenna will also re-
	main out.

press .

Press DSC.

NEDERLANDS SVENSKA

ESPAÑOL PORTUGUÊS