Blaupunkt RCM 126 operating instructions Switching from stereo to mono FM, Programme type, News

Page 16
Selecting a programme type
• Press << or >>.
The programme type selected last will be displayed briefly.

Switching from stereo to mono (FM)

If reception is poor, you may get better sound quality by switching to mono:

Press the lo button for approximately two seconds.

With mono playback, the stereo sign will disappear from the display.

Each time the radio is switched on, stereo playback is activated.

The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.

PTY – Programme Type

Programme type

Checking the programme type of the

 

 

DEUTSCH

Use << >> to have the last selected pro-

station

 

 

 

 

 

 

 

 

 

gramme type displayed and to choose a new

• Press PTY for approximately two sec-

 

ENGLISH

one.

onds.

 

You can select any one of the stored types

After the beep tone the display will show the

 

with the preset buttons 1 - 6.

programme type offered by the tuned in sta-

 

 

 

Condition: PTY must be active.

tion.

 

FRANÇAIS

Using DSC you can choose between Ger-

If “NO PTY” appears in the display, the cur-

man and English (see “DSC programming - rent station has no PTY code.

PTY LANG”).

 

 

 

All of the programme types listed below are

Displaying the selected programme

 

available.

type

ITALIANO

The letters printed in bold are identical to

 

 

 

the actual short-time indication in the dis-

 

 

 

 

 

 

 

play.

PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function.

Switching PTY on/off

Press PTY.

When the function is active, the programme type selected last will briefly appear in the display. “PTY” will be permanently indi- cated in the lower right corner of the display panel.

NEWS

CURRENT AFFAIRS

INFORMATION

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music)

PTY 16 to PTY 30 are not yet assigned.

a)Using the preset buttons

When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory.

Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds.

If you wish to listen to a station with this PTY,

press / to start seek tuning op- eration.

NEDERLANDS SVENSKA

ESPAÑOL PORTUGUÊS

45

Image 16
Contents Köln RCM Page Contents Quick reference FMTExtra rocker switch functions Rocker switchAUD J GEO DSC Mode H PTY Display Flashing KeyCard tongueMIX MIX CDMIX MAG MIX OFF@ DIS AUD Extra function GEOImportant notes KeyCard theft protection system Removing the KeyCardReplacing a KeyCard Never pull out the KeyCard directlyTurn On Message T.O.M Switching off the flashlightCare of your KeyCard Radio operation with RDS Radio Data System Manual tuning with Scrolling through the broadcast- ing networks only FMChanging the memory bank FM Storing stationsTo start Preset Scan To select a scanned station and switchOff Preset Scan Changing the scan timeProgramme type Switching from stereo to mono FMNews Scanning stations with PTY-SCAN Storing programme typesPTY priority Radiotext Switching the warning beep off Receiving traffic programme stations with RDS-EONTraffic announcement priority On/offAutomatic seek tuning start To make a settingTraffic Memo TIM Programming the TIM standby mode / TIM timesMenu Deactivating the TIM standby mode TIM standby mode while the raDio is switched off Recalling stored traffic messag- esTemporarily interrupting the TIM standby mode Before driving into a car washTape operation Tions with Blank Skip Dolby BC NRSwitching to CDC operation CD changer operation optionalSelecting CDs and titles MIX playbackScan operation Selecting the display mode Storing the display modeTo stop the Scan function DSC-UPDATE Deleting CD names withDSC programming Colour To quit the DSC programming mode and store the adjustment Overview of the DSC factory settingsAUX Specifications AppendixTuner Tape playerBosch Gruppe
Related manuals
Manual 31 pages 21.97 Kb Manual 27 pages 5.33 Kb