Select SEARCH menu:
•Press TU, MW or LW, SEARCH
If no stations have been stored on the MW waveband it is not possible to select SEARCH. SCAN can only be used in the SEARCH menu.
Start SCAN:
•Press SCAN.
If no station is selected during the scanning process then the station that was selected originally will be played.
End SCAN:
•Press EXIT , the last station scanned will begin normal play.
Storing stations
FM stations
Up to 16 FM stations from the reception table can be stored in the preference table.
Select reception table to store stations:
•Press TU and FM one after the other, the display header should not be highlighted, if it is, switch by pressing << or >>.
The stations within reception range will appear in the display.
Store selected station:
•Press or for the station you wish to store, e.g. NDR 2, for approxi- mately 1 second until you hear a beep.
This station will be stored in the preference table. The stations will appear in the order in which they are stored.
You will hear a double beep when the table is full. Then you have already stored 16 FM stations.
S
| 756 | |
|
|
|
SEARCH |
| 621 |
SCAN |
| 828 |
756 |
| 836 |
1566 |
| 944 |
612 |
|
|
S
756
SCAN
LOCAL
DX
STORE
EXIT
S
NDR 2
SEARCH |
| BREMEN 3 | |
SCAN |
| HR 3 | |
| NDR1 NDS | ||
BREMEN 1 |
| NDR | 2 |
BREMEN 2 |
| NDR | 3 |
21
DEUTSCH | ENGLISH | FRANÇAIS | ITALIANO | NEDERLANDS | SVENSKA | ESPAÑOL | PORTUGUÊS |
|
|
|
|
|
|
|
|