Blaupunkt RDM 127 operating instructions TU tuner, CDC CD changer

Page 6

2+ / -

Adjusting the volume:

The volume can be adjusted from VOLUME +0 to VOLUME +80. Press + or - to adjust the volume in either direction in 15 increments per second.

Each time the set is switched on, it will play at the pre- adjusted volume level. The pre-adjusted volume level (VOL FIX) can be altered. Read the information in the section on “Programming with DSC – VARIOUS”.

Switching the volume to zero immediately:

Press ON briefly. MUTE will then appear in the display and the volume will be reduced to zero immediately.

Press ON again, and the set will resume playing at the vol- ume level last set.

The set will switch off automatically if it is set to mute for longer than 5 minutes.

3TIM (traffic memo) Setting the TIM times:

Press TIM for approximately 1 second.

Recalling stored traffic messages: Press TIM briefly.

Switching TIM off while using a car wash:

Press ON to switch the set off and then press TIM. TIM-FUNCTION DEACTIVATED will appear briefly in the display. The motor antenna will retract.

Be sure to read the section on “Traffic Memo (TIM)” for more important information.

4TU (tuner)

Press this key to switch to operating the radio (main menu). If you press TU while the radio is playing, the set will switch between the main menu and the menu selected last.

5CD

Press to switch to operating the CD player.

6CDC (CD changer)

Press to switch to operating the CD changer (optional).

If the Blaupunkt CDC F 07 changer has not been connect- ed, NO CHANGER CONNECTED will appear in the display.

7AUX

Press to switch to any additional equipment connected. Refer to “Accessories” to find out which auxiliary equipment can be added to this system.

6

Image 6

Contents New York RDM Table of contents Traffic safetyAccessories PrecautionsInstallation Important informationRemote control RC OptionalOn / Mute Switching on/off Quick referenceTU tuner CDC CD changerDisplay/Selection menu Display headerCD eject Open/close panel. Eject/insert CD Softkeys = Multi-functional rocker switch or remote control but Tons optional Radio modeAdditional functions for the rocker switch Inserting the KeyCard Flashing KeyCard tongueKeyCard anti-theft system Starting up the unitRemoving the KeyCard Training the second KeyCard / replacing the KeyCardDSC-MAIN Menu Displaying the radio pass data Short Additional Memory S.A.MTurn On Message T.O.M Switching off the flashing light Optical indication of anti-theft protectionTaking care of your KeyCard Setting the clock First-time installationFirst Install Clock OWNER-ID AUX-IN Norm SET Exit Detailed operating instructionsOWNER-ID Clear Exit First Install AUXAUX-NAME Exit L K M a N Clear Exit Resetting to original factory settings Switching to the radio mode Radio operation with RDS Radio Data SystemSelecting the waveband NDR Switching from the reception table to the preference tableSelecting a station NDR1 NDSBy station search or manually LocalStore Exit Start the station search function by pressingStart Scan A NWith Scan End ScanFM stations Storing stationsStore Exit NDR Search Bremen Scan Select reception table to store stationsStoring MW/LW stations Deleting stored stationLocal DX Store Select search menu to store stationsStation name Alternative frequencySearch Scan Antenne NDR2 MDR Life NDR1 NDS Brocken PTY NDR1 NDS REG-E Text Switching the regional programme function on/offREG Regional programmes RegionalAffairs Switching the PTY menu on/offPTY PTY Menu News InfoProgramme type PTY Menu NewsSwitching PTY on / Selecting the programme type ActivateAffairs Giving radio stations a name Enter Clear ExitSearch Scan Switching traffic announcement priority on/offTraffic message reception with RDS-EON Bremen 1 Bremen Bremen 3 HR 3 NDR1 NDSPTY Traffic Message Switching the warning beep offAutomatic start of station search TA OFF ExitAdjusting the volume for traffic announcements Adjusting the sound stage for traffic messages and TIMTreble Bass Fader Balance Exit Traffic Memo TIM TIM ActiveYour motor antenna may be damaged in a car wash Displaying the time Setting the exact timeHours Hours + MIN MIN + Exit Correcting the timeHours Hours + MIN Timer Programming the TIM standby mode / TIM timesTimer TimerActive Exit TIM NDR Hours Hours + MIN MIN + TimerRecalling stored traffic messages CUETIM Active Timer TIM standby mode while the radio is switched offSwitching the TIM standby mode on/off ActiveTIM Active TIM-FUNCTION Deactivated Inserting a CD Switching to the CD modeOperating the CD player MIX CD Name Scan Repeat TPM TPM CLREjecting a CD Selecting a trackScan MIXScan Repeat TPM TPM CLR MIX CD Name Repeat TPM TPM CLRRepeat Repeating a track RepeatMIX CD Name Scan TPM TPM CLR TPM Programmed MIX CD Name Scan RepeatTPM Deleting the TPM memory TPM CLRMIX CD Name Scan Repeat TPM CLR TPM Track Clrd MIX CD Name Scan RepeatGiving CDs a name CDC Name Clear Exit V a L DSelecting the display mode TRACK/TIME Deleting the name of a CD CD NameDisc Empty Switching to the CD changer modeOperating a CD changer optional DiscSelecting a CD and a track Display header will indicate the current selectionMIX Disc Scan Time Repeat TPM TPM CLR Scan TR MIX CDC NameRepeat a CD or a track Repeat Repeat Track MIX CDC Name Scan TimeTPM TPM CLR TPM Programmed MIX CDC Name Scan Time Repeat TPM CLR Disc TPM CLR TPM Track Clrd MIX CDC Name Scan Time RepeatTPM Disc Clrd MIX CDC Name Scan Time Repeat TPM CLR Prev CD Next CD Clear ExitDeleting the TPM memory for all of the magazines Deleting the name of a CD CDC Name L DPrev Next CD Clear Exit L D MIX CDC Name Scan Track Repeat TPM TPM CLR AUX mode Switching on AUXLoudness Audio settingsBass, treble, balance, fader Treble +5 Bass DNC Fader Balance Exit Loudness Loudness onAdjusting DNC DNC-ADJUST StopDNC Adjusting DNC sensitivityDNC-LEVEL MID Treble Bass Fader Balance Exit LoudnessAUTO-EQ2 EQ EqualizerEqualizer Menu AUTO-EQ1 View EQ AUTO-EQ3 MAN-EQ Exit EQ OFFHi-fi calibration Start Hi-fi calibrationYesno View AUTO-EQ Front Left Next Exit Checking/altering Hi-fi calibrationSET AUTO-EQ Front Left Calling up the Hi-fi calibrationSetting the equalizer manually Calling up the manual equalizer settingProgramming with DSC Car radios have been pre-programmed at the factoryTable Size MENU-OFF AngleDSC-VARIOUS Menu Clock VOL FIX Beep KC LEDLoudness Exit Scantime DSC-KEYCARD Learn KC Read KC Exit VOL FIXMuting the audio source while using the car phone Specifications TunerCD player Blaupunkt telephone hotline Bosch Gruppe