Blaupunkt RDM 127 Yesno View AUTO-EQ Front Left Next Exit, Checking/altering Hi-fi calibration

Page 60

Use DNC for the preliminary check.

DNC-LEVEL OFF means linear frequency

DNC-LEVEL LOW means slight emphasis on bass sound

DNC-LEVEL MID means medium emphasis on bass sound

DNC-LEVEL HIGH means heavy emphasis on bass sound.

•Press S, EQ one after the other. Place the microphone in one of the positions.

•Press the corresponding softkey (AUTO-EQ1 ... AUTO-EQ3) for approxi- mately 1 second.

PLEASE PLACE MICROPHONE 10 ... 0, the countdown has begun. The calibration procedure will run automatically after the countdown.

Make sure that the surroundings are as quiet as possible during the calibration procedure. Press STOP to abort the calibration if necessary.

As soon as the calibration procedure has been completed, AUTO-EQ READY ...

will appear in the display. The following question will appear in the display: ALL BASS/TREBLE ADJUSTMENTS ARE SET TO “0”.

•Press either YES or NO .

The calibration process for this setting has been completed.

Checking/altering Hi-fi calibration

If necessary, you can check or correct the automatic calibration for any of the channels:

•Press S, EQ one after the other.

•Press the corresponding softkey briefly (AUTO-EQ1 ... AUTO-EQ3). The function selected, e.g. AUTO-EQ2will be highlighted in the display.

•Press VIEW EQ . VIEW AUTO-EQ 2 will appear in the display header, for example. The display will indicate the equalizer settings for the front left loudspeaker.

S

AUTO-EQ ADJUST

PLEASE PLACE

MICROPHONE

10

STOP

S

AUTO-EQ READY

ALL BASS/TREBLE

ADJUSTMENTS ARE

SET TO "0"

YESNO

S

VIEW AUTO-EQ 2

FRONT LEFT

------------------

NEXT EXIT

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents
New York RDM Table of contents Traffic safetyPrecautions InstallationAccessories Important informationRemote control RC OptionalOn / Mute Switching on/off Quick referenceTU tuner CDC CD changerDisplay/Selection menu Display headerCD eject Open/close panel. Eject/insert CD Softkeys = Multi-functional rocker switch or remote control but Tons optional Radio modeAdditional functions for the rocker switch Inserting the KeyCard Flashing KeyCard tongueKeyCard anti-theft system Starting up the unitRemoving the KeyCard Training the second KeyCard / replacing the KeyCardDSC-MAIN Menu Displaying the radio pass data Short Additional Memory S.A.MTurn On Message T.O.M Switching off the flashing light Optical indication of anti-theft protectionTaking care of your KeyCard First-time installation First Install Clock OWNER-ID AUX-IN Norm SET ExitSetting the clock Detailed operating instructionsOWNER-ID Clear Exit First Install AUXAUX-NAME Exit L K M a N Clear Exit Resetting to original factory settings Switching to the radio mode Radio operation with RDS Radio Data SystemSelecting the waveband Switching from the reception table to the preference table Selecting a stationNDR NDR1 NDSLocal Store ExitBy station search or manually Start the station search function by pressingA N With ScanStart Scan End ScanStoring stations Store Exit NDR Search Bremen ScanFM stations Select reception table to store stationsDeleting stored station Local DX StoreStoring MW/LW stations Select search menu to store stationsStation name Alternative frequencySearch Scan Antenne NDR2 MDR Life NDR1 NDS Brocken Switching the regional programme function on/off REG Regional programmesPTY NDR1 NDS REG-E Text RegionalSwitching the PTY menu on/off PTY PTY Menu NewsAffairs InfoProgramme type PTY Menu NewsSwitching PTY on / Selecting the programme type ActivateAffairs Giving radio stations a name Enter Clear ExitSwitching traffic announcement priority on/off Traffic message reception with RDS-EONSearch Scan Bremen 1 Bremen Bremen 3 HR 3 NDR1 NDSSwitching the warning beep off Automatic start of station searchPTY Traffic Message TA OFF ExitAdjusting the volume for traffic announcements Adjusting the sound stage for traffic messages and TIMTreble Bass Fader Balance Exit Traffic Memo TIM TIM ActiveYour motor antenna may be damaged in a car wash Setting the exact time Hours Hours + MIN MIN + ExitDisplaying the time Correcting the timeProgramming the TIM standby mode / TIM times TimerHours Hours + MIN Timer TimerHours Hours + MIN MIN + Timer Recalling stored traffic messagesActive Exit TIM NDR CUETIM standby mode while the radio is switched off Switching the TIM standby mode on/offTIM Active Timer ActiveTIM Active TIM-FUNCTION Deactivated Switching to the CD mode Operating the CD playerInserting a CD MIX CD Name Scan Repeat TPM TPM CLREjecting a CD Selecting a trackMIX Scan Repeat TPM TPM CLR MIX CD NameScan Repeat TPM TPM CLRRepeating a track Repeat MIX CD Name ScanRepeat TPM TPM CLR TPM Programmed MIX CD Name Scan RepeatDeleting the TPM memory TPM CLR MIX CD Name Scan RepeatTPM TPM CLR TPM Track Clrd MIX CD Name Scan RepeatGiving CDs a name CDC Name Clear Exit V a L DSelecting the display mode TRACK/TIME Deleting the name of a CD CD NameSwitching to the CD changer mode Operating a CD changer optionalDisc Empty DiscSelecting a CD and a track Display header will indicate the current selectionMIX Disc Scan Time Repeat TPM TPM CLR Scan TR MIX CDC NameRepeat a CD or a track Repeat Repeat Track MIX CDC Name Scan TimeTPM TPM CLR TPM Programmed MIX CDC Name Scan Time Repeat TPM CLR Disc TPM CLR TPM Track Clrd MIX CDC Name Scan Time RepeatTPM Disc Clrd MIX CDC Name Scan Time Repeat TPM CLR Prev CD Next CD Clear ExitDeleting the TPM memory for all of the magazines Deleting the name of a CD CDC Name L DPrev Next CD Clear Exit L D MIX CDC Name Scan Track Repeat TPM TPM CLR AUX mode Switching on AUXAudio settings Bass, treble, balance, faderLoudness Treble +5 Bass DNC Fader Balance Exit Loudness Loudness on Adjusting DNC DNC-ADJUST StopAdjusting DNC sensitivity DNC-LEVEL MID Treble BassDNC Fader Balance Exit LoudnessEQ Equalizer Equalizer Menu AUTO-EQ1 View EQAUTO-EQ2 AUTO-EQ3 MAN-EQ Exit EQ OFFHi-fi calibration Start Hi-fi calibrationYesno View AUTO-EQ Front Left Next Exit Checking/altering Hi-fi calibrationSET AUTO-EQ Front Left Calling up the Hi-fi calibrationSetting the equalizer manually Calling up the manual equalizer settingProgramming with DSC Car radios have been pre-programmed at the factoryTable Size MENU-OFF AngleDSC-VARIOUS Menu Clock VOL FIX Beep KC LEDLoudness Exit Scantime DSC-KEYCARD Learn KC Read KC Exit VOL FIXMuting the audio source while using the car phone Specifications TunerCD player Blaupunkt telephone hotline Bosch Gruppe
Top Page Image Contents