Blaupunkt RDM 127 operating instructions Start Hi-fi calibration

Page 59

Hi-fi calibration

You can set and store automatic calibrations for three different situations.

The calibrations are started and called up using the softkey ().

You can select the following settings:

AUTO-EQ1for the driver alone

AUTO-EQ2for the driver and front-seat passenger

AUTO-EQ3for passengers in the front and rear.

Press EQ OFF to switch off the equalizer (EQ OFF in the display header).

To make the calibration hold the microphone in the corresponding position (do not cover microphone opening).

For setting 1 (driver alone), position the microphone directly at the height of the driver’s head. For setting 2, place the microphone between the driver and the passenger on the front seat. For setting 3, place the microphone centrally be- tween the front and rear seats.

Start Hi-fi calibration

During the calibration process it is important that the surroundings are very quiet.

Any outside noises will distort the readings.

The loudspeakers should not be blocked by any objects.

The car radio must be switched on.

•Place the microphone in the desired position.

The readings will be distorted if the microphone is placed in an incorrect position.

Depending on the vehicle and the position of the loudspeakers, the calibration can be linear or can boost the bass sounds.

Try the settings to find out which one you prefer.

59

DEUTSCH	ENGLISH	FRANÇAIS	ITALIANO	NEDERLANDS	SVENSKA	ESPAÑOL	PORTUGUÊS

Image 59

Contents New York RDM Traffic safety Table of contentsImportant information PrecautionsInstallation AccessoriesOptional Remote control RCQuick reference On / Mute Switching on/offCDC CD changer TU tunerCD eject Open/close panel. Eject/insert CD Softkeys Display/Selection menuDisplay header Additional functions for the rocker switch = Multi-functional rocker switch or remote control butTons optional Radio mode Flashing KeyCard tongue Inserting the KeyCardStarting up the unit KeyCard anti-theft systemDSC-MAIN Menu Removing the KeyCardTraining the second KeyCard / replacing the KeyCard Turn On Message T.O.M Displaying the radio pass dataShort Additional Memory S.A.M Taking care of your KeyCard Switching off the flashing lightOptical indication of anti-theft protection Detailed operating instructions First-time installationFirst Install Clock OWNER-ID AUX-IN Norm SET Exit Setting the clockAUX-NAME Exit L K M a N Clear Exit OWNER-ID Clear Exit First InstallAUX Resetting to original factory settings Selecting the waveband Switching to the radio modeRadio operation with RDS Radio Data System NDR1 NDS Switching from the reception table to the preference tableSelecting a station NDRStart the station search function by pressing LocalStore Exit By station search or manuallyEnd Scan A NWith Scan Start ScanSelect reception table to store stations Storing stationsStore Exit NDR Search Bremen Scan FM stationsSelect search menu to store stations Deleting stored stationLocal DX Store Storing MW/LW stationsSearch Scan Antenne NDR2 MDR Life NDR1 NDS Brocken Station nameAlternative frequency Regional Switching the regional programme function on/offREG Regional programmes PTY NDR1 NDS REG-E TextInfo Switching the PTY menu on/offPTY PTY Menu News AffairsPTY Menu News Programme typeAffairs Switching PTY on / Selecting the programme typeActivate Enter Clear Exit Giving radio stations a nameBremen 1 Bremen Bremen 3 HR 3 NDR1 NDS Switching traffic announcement priority on/offTraffic message reception with RDS-EON Search ScanTA OFF Exit Switching the warning beep offAutomatic start of station search PTY Traffic MessageTreble Bass Fader Balance Exit Adjusting the volume for traffic announcementsAdjusting the sound stage for traffic messages and TIM Your motor antenna may be damaged in a car wash Traffic Memo TIMTIM Active Correcting the time Setting the exact timeHours Hours + MIN MIN + Exit Displaying the timeTimer Programming the TIM standby mode / TIM timesTimer Hours Hours + MIN TimerCUE Hours Hours + MIN MIN + TimerRecalling stored traffic messages Active Exit TIM NDRActive TIM standby mode while the radio is switched offSwitching the TIM standby mode on/off TIM Active TimerTIM Active TIM-FUNCTION Deactivated MIX CD Name Scan Repeat TPM TPM CLR Switching to the CD modeOperating the CD player Inserting a CDSelecting a track Ejecting a CDRepeat TPM TPM CLR MIXScan Repeat TPM TPM CLR MIX CD Name ScanTPM TPM CLR TPM Programmed MIX CD Name Scan Repeat Repeating a track RepeatMIX CD Name Scan RepeatTPM CLR TPM Track Clrd MIX CD Name Scan Repeat Deleting the TPM memory TPM CLRMIX CD Name Scan Repeat TPMClear Exit V a L D Giving CDs a name CDC NameDeleting the name of a CD CD Name Selecting the display mode TRACK/TIMEDisc Switching to the CD changer modeOperating a CD changer optional Disc EmptyDisplay header will indicate the current selection Selecting a CD and a trackScan Time Repeat TPM TPM CLR Scan TR MIX CDC Name MIX DiscTPM TPM CLR Repeat a CD or a track RepeatRepeat Track MIX CDC Name Scan Time TPM CLR TPM Track Clrd MIX CDC Name Scan Time Repeat TPM Programmed MIX CDC Name Scan Time Repeat TPM CLR DiscDeleting the TPM memory for all of the magazines TPM Disc Clrd MIX CDC Name Scan Time RepeatTPM CLR Prev CD Next CD Clear Exit Prev Next CD Clear Exit L D Deleting the name of a CD CDC NameL D MIX CDC Name Scan Track Repeat TPM TPM CLR Switching on AUX AUX modeTreble +5 Bass DNC Fader Balance Exit Loudness Loudness on Audio settingsBass, treble, balance, fader LoudnessDNC-ADJUST Stop Adjusting DNCFader Balance Exit Loudness Adjusting DNC sensitivityDNC-LEVEL MID Treble Bass DNCAUTO-EQ3 MAN-EQ Exit EQ OFF EQ EqualizerEqualizer Menu AUTO-EQ1 View EQ AUTO-EQ2Start Hi-fi calibration Hi-fi calibrationChecking/altering Hi-fi calibration Yesno View AUTO-EQ Front Left Next ExitCalling up the Hi-fi calibration SET AUTO-EQ Front LeftCalling up the manual equalizer setting Setting the equalizer manuallyCar radios have been pre-programmed at the factory Programming with DSCTable Size Angle MENU-OFFLoudness Exit Scantime DSC-VARIOUS Menu Clock VOL FIX BeepKC LED VOL FIX DSC-KEYCARD Learn KC Read KC ExitMuting the audio source while using the car phone CD player SpecificationsTuner Bosch Gruppe Blaupunkt telephone hotline