Blaupunkt RDM 127 operating instructions Quick reference, On / Mute Switching on/off

Page 5

Quick reference

1ON / Mute Switching on/off:

Press ON.

To switch the set on with the ON button, the KeyCard has to be inserted. The unit will play at the pre-adjusted volume level (VOL FIX).

To switch the set off, press ON for longer than 0.5 seconds.

Mute:

On/off:

Press ON or on the remote control briefly. MUTE will ap- pear in the display when the mute function has been activat- ed.

The set will switch off automatically if it is set to mute for longer than 5 minutes.

Switching the set on for the first time:

If the set is switched on for the first time or after the power supply has been disconnected, the FIRST INSTALL menu will appear in the display.

If you would like to alter any of the settings, read the in- structions in the section on “First installation”.

You can exit the FIRST INSTALL menu by pressing the se- lection button marked EXIT .

Switching on/off with the KeyCard:

Switch the set on by pressing ON.

Note

First read the information in the section on the “KeyCard anti-theft system”.

Switching on/off with the ignition:

It is possible to switch the set on and off with the vehicle ig- nition if it has been installed to do so.

After the set has been switched off using the ignition, a dou- ble beep will remind you to remove the KeyCard before you leave the vehicle.

Switching the set on when the ignition is off:

The set can be switched on again by pressing ON if the KeyCard is left in the set after the double beep.

After playing for one hour, the set will switch off again auto- matically in order to save battery power.

If you press ON again, the set will play again for one hour.

5

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

 

 

 

 

 

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents
New York RDM Traffic safety Table of contentsInstallation PrecautionsAccessories Important informationOptional Remote control RCQuick reference On / Mute Switching on/offCDC CD changer TU tunerCD eject Open/close panel. Eject/insert CD Softkeys Display/Selection menuDisplay header Additional functions for the rocker switch = Multi-functional rocker switch or remote control butTons optional Radio mode Flashing KeyCard tongue Inserting the KeyCardStarting up the unit KeyCard anti-theft systemDSC-MAIN Menu Removing the KeyCardTraining the second KeyCard / replacing the KeyCard Turn On Message T.O.M Displaying the radio pass dataShort Additional Memory S.A.M Taking care of your KeyCard Switching off the flashing lightOptical indication of anti-theft protection First Install Clock OWNER-ID AUX-IN Norm SET Exit First-time installationSetting the clock Detailed operating instructionsAUX-NAME Exit L K M a N Clear Exit OWNER-ID Clear Exit First InstallAUX Resetting to original factory settings Selecting the waveband Switching to the radio modeRadio operation with RDS Radio Data System Selecting a station Switching from the reception table to the preference tableNDR NDR1 NDSStore Exit LocalBy station search or manually Start the station search function by pressingWith Scan A NStart Scan End ScanStore Exit NDR Search Bremen Scan Storing stationsFM stations Select reception table to store stationsLocal DX Store Deleting stored stationStoring MW/LW stations Select search menu to store stationsSearch Scan Antenne NDR2 MDR Life NDR1 NDS Brocken Station nameAlternative frequency REG Regional programmes Switching the regional programme function on/offPTY NDR1 NDS REG-E Text RegionalPTY PTY Menu News Switching the PTY menu on/offAffairs InfoPTY Menu News Programme typeAffairs Switching PTY on / Selecting the programme typeActivate Enter Clear Exit Giving radio stations a nameTraffic message reception with RDS-EON Switching traffic announcement priority on/offSearch Scan Bremen 1 Bremen Bremen 3 HR 3 NDR1 NDSAutomatic start of station search Switching the warning beep offPTY Traffic Message TA OFF ExitTreble Bass Fader Balance Exit Adjusting the volume for traffic announcementsAdjusting the sound stage for traffic messages and TIM Your motor antenna may be damaged in a car wash Traffic Memo TIMTIM Active Hours Hours + MIN MIN + Exit Setting the exact timeDisplaying the time Correcting the timeTimer Programming the TIM standby mode / TIM timesHours Hours + MIN Timer TimerRecalling stored traffic messages Hours Hours + MIN MIN + TimerActive Exit TIM NDR CUESwitching the TIM standby mode on/off TIM standby mode while the radio is switched offTIM Active Timer ActiveTIM Active TIM-FUNCTION Deactivated Operating the CD player Switching to the CD modeInserting a CD MIX CD Name Scan Repeat TPM TPM CLRSelecting a track Ejecting a CDScan Repeat TPM TPM CLR MIX CD Name MIXScan Repeat TPM TPM CLRMIX CD Name Scan Repeating a track RepeatRepeat TPM TPM CLR TPM Programmed MIX CD Name Scan RepeatMIX CD Name Scan Repeat Deleting the TPM memory TPM CLRTPM TPM CLR TPM Track Clrd MIX CD Name Scan RepeatClear Exit V a L D Giving CDs a name CDC NameDeleting the name of a CD CD Name Selecting the display mode TRACK/TIMEOperating a CD changer optional Switching to the CD changer modeDisc Empty DiscDisplay header will indicate the current selection Selecting a CD and a trackScan Time Repeat TPM TPM CLR Scan TR MIX CDC Name MIX DiscTPM TPM CLR Repeat a CD or a track RepeatRepeat Track MIX CDC Name Scan Time TPM CLR TPM Track Clrd MIX CDC Name Scan Time Repeat TPM Programmed MIX CDC Name Scan Time Repeat TPM CLR DiscDeleting the TPM memory for all of the magazines TPM Disc Clrd MIX CDC Name Scan Time RepeatTPM CLR Prev CD Next CD Clear Exit Prev Next CD Clear Exit L D Deleting the name of a CD CDC NameL D MIX CDC Name Scan Track Repeat TPM TPM CLR Switching on AUX AUX modeBass, treble, balance, fader Audio settingsLoudness Treble +5 Bass DNC Fader Balance Exit Loudness Loudness onDNC-ADJUST Stop Adjusting DNCDNC-LEVEL MID Treble Bass Adjusting DNC sensitivityDNC Fader Balance Exit LoudnessEqualizer Menu AUTO-EQ1 View EQ EQ EqualizerAUTO-EQ2 AUTO-EQ3 MAN-EQ Exit EQ OFFStart Hi-fi calibration Hi-fi calibrationChecking/altering Hi-fi calibration Yesno View AUTO-EQ Front Left Next ExitCalling up the Hi-fi calibration SET AUTO-EQ Front LeftCalling up the manual equalizer setting Setting the equalizer manuallyCar radios have been pre-programmed at the factory Programming with DSCTable Size Angle MENU-OFFLoudness Exit Scantime DSC-VARIOUS Menu Clock VOL FIX BeepKC LED VOL FIX DSC-KEYCARD Learn KC Read KC ExitMuting the audio source while using the car phone CD player SpecificationsTuner Bosch Gruppe Blaupunkt telephone hotline
Top Page Image Contents