DVD OPERATION
This device can be used to play the following data carriers/data formats:
●DVD video and DVD audio. DVD- MP3/WMA
●Video CD (VCD).
●MP3/WMA CDs, see the chapter ÒMP3/WMA modeÓ.
●Audio CDs, see the chapter ÒCD modeÓ.
License
Manufactured under license of Dolby Laboratories. ÒDolbyÓ, ÒPro LogicÓ and the
This product contains technologies that are
Switching to DVD mode
If there is no DVD inserted in the drive,
➮switch on the device by pressing button 1.
➮Press the button 2.
The control panel opens.
➮Gently insert the DVD with its printed side pointing up into the drive until you feel some resist- ance.
The drive draws in the DVD automati- cally.
You must not hinder or assist the drive as it draws in the DVD.
➮Gently close the control panel whilst exerting a little pressure un- til you feel it click into place.
The DVD data are loaded.
Dependent upon the inserted DVD, the playback starts or the DVD menu dis- plays.
If a DVD is already inserted in the drive,
➮press the SRC button ;on the device or the SOURCE button ; on the remote control repeatedly until ÒDVDÓ appears on the display.
Playback begins from the point at which it was last interrupted.
Starting playback
After the desired DVD/VCD is loaded, either the DVD menu is displayed or the playback starts. This action is de- pendent upon the inserted DVD.
➮Press the button Aor move the selection mark to the menu
item that starts the movie, and press the ENTER button >to start the playback.
The DVD starts playing.
88