| EQUALIZER |
X-BASS
The
Adjusting the
The
ÒLVL 0Ó means that no
➮Press the AUD¥DEQ button :on
the device or 3D :on the remote control.
ÒBASSÓ appears on the display.
➮Press the or button 6repeat- edly until
➮Press the MENU¥OK button 7or ENTER >on the remote control.
The
➮Press the or button 6to set the frequency that you want.
➮Press the button 6.
The boost level (LVL) flashes.
➮Press the or button 6to set the boost level that you want.
➮Press the AUD¥DEQ :button.
Equalizer
The device features a digital equalizer DEQ.
This means you have three
You can configure the EQ1 - EQ3 equalizers manually. When doing so you can adjust (boost or reduce) one frequency of an equalizer band as well as the quality factor, i.e. the width of the filter.
The following bands are available:
● | LOW 1 | 20 - 250 Hz |
● | LOW 2 | 20 - 250 Hz |
●HIGH 1 315 - 20,000 Hz
●HIGH 2 315 - 20,000 Hz
●HIGH 3 315 - 20,000 Hz
Switching the equalizer on/off
To switch the equalizer on/off,
➮hold the AUD¥DEQ button :or
the 3D button :on the remote control pressed for more than two seconds.
The equalizer menu appears on the display.
To activate the equalizer,
➮select one of the sound presets or adjust the equalizer manually. For further details on this, please read the sections that follow in this chapter.