Blaupunkt 7 645 650 310 operating instructions Audio Setup, Spdif setting

DVD OPERATION

●WIDE: The DVD player is con- nected to a 16:9 monitor. The wide image is displayed on the screen at full size.

Displaying the camera perspective

You can specify that a camera symbol is shown if more than one camera per- spective is available on the DVD. For this purpose, select the setting ÒONÓ.

The setting of the camera perspective is performed under the ÒAngle MarkÓ menu item.

Displaying captions

Captions are special subtitles that can- not be switched on/off using the subtitle function of a DVD. You can use this menu to switch these subtitles on or off. Se- lect the setting ÒOffÓ to switch it off.

DVD/DVD audio priority

DVD audio generally contains audio data in two versions:

One high-resolution uncompressed variant and one compressed variant (e.g. in DTS or Dolby Digital).

Here you can define whether you want to listen to high-resolution audio data or to compressed audio data.

Select the ÒDVD AudioÓ setting for high- er quality or ÒDVD VideoÓ for the com- pressed version.

The setting of the priority is performed under the ÒPriorityÓ menu item.

Audio Setup

The Audio Setup allows you to control the SPDIF output of the device, set the PCM channel and set the sampling rate of the LPCM output. In addition, you can control the Dynamic Range Con- trol (DRC) and the HDCD filter.

SPDIF setting

For the SPDIF output of the device, you can select whether an SPDIF-RAW signal, an SPDIF-PCM signal a manu- ally controlled signal should be output or that the SPDIF output should be switched off.

Select the desired setting under ÒSPDIF OutputÓ.

Notes:

●The SPDIF output is not muted for traffic announcements, incoming telephone calls and navigation voice output.

●The audio data of the DVD drive are output via the SPDIF output.

PCM channel

The SPDIF output can be used to out- put the PCM data in the ÒL/RÓ, ÒLS/RSÓ or ÒC/LFEÓ mode.

The respective setting can be per- formed under ÒPCM ChannelÓ in the ÒSPDIF OutputÓ.

98