CONTROL PANEL | SWITCHING ON/OFF |
Attaching the control panel
➮Hold the control panel at approxi- mately right angles to the device.
➮Slide the control panel into the de- viceÕs guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place.
➮Flip up the control panel and care- fully press it into the device until it clicks into place.
2.
1.
Note:
When attaching the control panel, make sure you do not press the display.
If the device was still switched on when you detached the control panel, it will automatically switch on with the last setting activated (radio, DVD/CD, CD changer or AUX) when the panel is replaced.
Switching on/off
There are various ways of switching the device on/off:
Switching on/off using the vehicle ignition
The device will switch on/off simulta- neously with the ignition if the device is correctly connected to the vehicleÕs ignition and you did not switch the de- vice off by pressing button 1.
Switching the device on/off using the detachable control panel
➮Detach the control panel.
The device switches off automatically after approx. one minute.
➮Attach the control panel again.
The device switches on. The last set- ting (radio, DVD/CD, CD changer or AUX) will be reactivated.
Switching on/off using button 1
➮To switch on the device, press but- ton 1.
➮To switch off the device, press and hold down button 1for longer than two seconds.
The device switches off.
Note:
To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off.
76