Bosch Appliances D6600 D6610 CPU Card and D6615 CPU Terminator Card

Page 22

22 en D6600 Specific Cards

Conettix Communications Receiver/

 

Gateway

 

 

 

 

 

 

 

 

2.

Open the display door on the D6600. One telephone line card is installed in the D6600

 

 

when the unit is shipped from the factory.

 

 

 

3.

Insert the new line card into the slot by aligning the top and bottom of the line card with

 

 

the card guides in the D6600 chassis. Firmly push the card to make sure it is fully

 

 

 

connected.

 

 

 

4.

If you are installing a new telephone line card, remove the appropriate snap-in covers

 

 

from the front of the panel.

 

 

 

5.

Close the front panel.

 

 

 

6.

Program the line card if necessary.

 

 

 

 

When the line card is initialized (as indicated by a printer report), the settings in the line

 

 

card programming section automatically load into the card.

 

 

 

7.

Connect communication lines to the line card.

 

 

 

D6640/D6641 Telephone Line Monitoring

 

 

 

Each line on the line card continuously monitors the telephone line voltage whether on-hook

 

or off-hook. If the voltage on a line falls below 1.8 VDC a Line Trouble indication is generated

 

and when it rises above 2.5 VDC it generates a restoral for this line.

 

6.3

D6610 CPU Card and D6615 CPU Terminator Card

 

The CPU card connects to the user interface on the front of the D6600 using a 50-pin ribbon cable socket.

Figure 6.4: D6615 CPU Terminator Card

Callout Description

1 Alignment Guide - Stabilizes the connection and acts as a guide for connecting the terminator card to the CPU card.

2 COM3 Automation Computer Port - An auxiliary RS-232 port for connecting to a computer terminal or an automation computer. For SIA/6500 Mode Automation Format reporting, use a null-modem cable to connect to a computer.

3 COM4 RS-232 Port - Connection to a computer running the D6200 programming software.*

2012.11 08 4998122704

Installation and Operation Guide

Bosch Security Systems, Inc.

Image 22
Contents Conettix Communications Receiver/Gate- way Page Table of contents No Data Received Reports Network CommunicationsCentral Station Automation System Central Station Tips Troubleshooting Guide Specifications Service Information Emergency Procedures Before CallingAbout documentation IntroductionBosch Security Systems, Inc. Product Manufacturing Dates En Introduction Conettix Communications Receiver Gateway 3System overview D6600/D6100IPv6 Supported Communication FormatsConettix D6600 System Components Parts ListConettix D6100IPv6 System Components Quick Installation D6600Callout ᅳ Description AC Power and Telephone ConnectionsAutomation PC and External Parallel Printer Connections Time Setup D6600/D6100IPv6 Setting the Time and DateDate Setup D6600/D6100IPv6 Card Functions and Locations D6600 Front PanelSystem Trouble LED Status Solid Red or Yellow Clear Line Cards and ModulesName Model Description D6600 Rear View D6600 Communications Receiver/Gateway Rear ViewReceiver Card Placement D6600 Internal ViewD6100IPv6 Front Panel D6100IPv6 Rear ViewD6600 Specific Cards D6640/D6641 Line Cards and D6645 Line Terminator CardsD6640/D6641 LED Descriptions Card InstallationFlash Pattern Color Function Installing Terminator Cards Installing Line CardsD6610 CPU Card and D6615 CPU Terminator Card D6640/D6641 Telephone Line MonitoringRemoving the CPU Card Card Removal and ReplacementReplacing the CPU Card Printer Specifications Installation Check List InstallationShipment D6600 only Removing Power to the Receiver Rack Mount InstructionsStandby Power PowerPower Supply Modules Main Power Connecting External BatteriesMinimum Standby Battery Device Qty Battery Standby UPS AC Standby CurrentMinimum Standby UPS Power Estimated BTU Load10.1 Overview of Input and Output Ports Input and Output PortsUPS Monitoring through CPU Programmable Input Ports Input Default Connection Configuration Input Reverse Connection ConfigurationTerminator Card Configuration D6600/D6100IPv6 Operation 11.1 Process FlowBuzzer Operation How Call Groups WorkReporting Devices Primary and Secondary 11.2 Normal Operation Mode 11.3 Operating in Manual ModeLog Using the Keypad11.4 Keypad Menu Operation Event Buffer DisplaySoftware Version Display Keypad FunctionsClear Pending Events Function Busy Seconds Line Busy ReportsLCD/LED Availability Test Function Two-Way Audio SIAEnhancements and Changes Two-Way Auto Modes of OperationPage Network Communications PlementPanel NIC Callout ᅳ Description Setting Up the Host Computer 12.1 Conettix D6600/D6100IPv6 Pre-installation RequirementsHost Computer for Conettix D6600/D6100IPv6 System Setup OperationDouble-clickLocal Area connection Select Start → Settings → Control PanelProtocol TCP/IP Network administrator Page Page Network Failover Solution D6600 Only COM1 COM4Callout Description Conettix Datagram Type Differences Networking and Encryption Internal IP Address Source PortUsing Two D6686/D6682/D6680 Modules in a System Using Encryption for the First TimeUpgrading Encryption 12.3 Special Conettix D6600 Applications Obtaining the Latest D6200CD Software12.4.1 Factory Default IP Address 12.4 D6100IPv6 Configuration Setup InstructionsD6680/D6682 No Identifying the MAC Hardware Address 12.4.4 Using the D6200 to configure the D6100IPv612.4.3 Obtaining an IP Address FTP User Name admin FTP Password Pass Page Cidr D6100IPv6 I&O Guide 12.4.5 Configuring for Network Communication 12.5.2 Obtaining an IP Address 12.5 D6100i Configuration Setup Instructions12.5.1 Identifying the MAC Hardware Address EnterSelect Start → Run Initial IP Address Assignment Using ARP.EXEArp -s xxx.xxx.xxx.xxx zz-zz-zz-zz-zz-zz Select Turn Windows Features on or off Using Telnet to Finish the ConfigurationSelect Programs and Features Click StartControl PanelProgramsConfiguration Using Telnet Page Steps below, type the correct value and press Enter Press Enter1Enter 12.5.6 Configuring for Network CommunicationPress Down to view the 6.2 Network adapter and press Enter Press Down to view 6.3.6 Network Automation Output FormatPress Enter to view 6.4.1 IP Address 13.1 No Data Received 13.2 Data ErrorNo Data Received Reports 13.3 Wrong DataCentral Station Automation System Receiver system Direct ConnectReceiver System Standard/Network Automation Central Station Tips 15.6 Radio Frequency Interference 15.7 Test CommunicatorTroubleshooting Guide Symptom Problem SolutionPage Symptom Problem Solution Specifications LED Psdn D6600 and D6100IPv6 Listings and Approvals Service Information Emergency Data SheetReceiver Connected to Computer System? Yes No Page Page Bosch Security Systems, Inc
Related manuals
Manual 168 pages 55.61 Kb Manual 4 pages 782 b

D6600 specifications

Bosch Appliances is renowned for its innovative and high-quality home appliances, and the Bosch D6600 dishwasher perfectly embodies these values. Designed with the user in mind, the D6600 offers an exceptional cleaning experience combined with advanced technologies and practical features.

One of the standout features of the Bosch D6600 is its outstanding energy efficiency. It boasts an Energy Star certification, ensuring that it operates with minimal energy consumption while still delivering powerful cleaning performance. This not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to minimize their carbon footprint.

The D6600 employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and determine the level of dirtiness of dishes. This ensures that the dishwasher adjusts its wash cycles accordingly, providing a customized cleaning approach. This system guarantees thorough cleaning of even the toughest food residues, leaving dishes sparkling clean every time.

Quiet operation is another defining characteristic of the Bosch D6600. At just 44 dBA, it is one of the quietest dishwashers in its class, making it an ideal choice for open-concept living spaces or homes where noise is a concern. This level of noise is achieved thanks to Bosch’s insulation technology, which minimizes vibrations and sound emissions.

The dishwasher features a spacious and flexible interior, designed with Bosch’s RackMatic system. This innovative rack adjustment technology allows users to easily customize the loading capacity based on their needs. The top rack can be adjusted to three different heights, accommodating taller items in the bottom rack or larger cookware in the upper storage area.

Another highlight of the Bosch D6600 is its smart technology capabilities. Compatible with Home Connect, this feature enables users to control their dishwasher remotely via a smartphone app. Users can start cycles, receive notifications when the washing is complete, and even diagnose issues, enhancing convenience and user experience.

In addition to its efficient cleaning capabilities and user-friendly features, the Bosch D6600 also includes a robust sanitation option. The Sanitize feature raises water temperature to eliminate 99.9% of bacteria, ensuring that dishes not only look clean but are thoroughly sanitized.

With its combination of cutting-edge technology, energy efficiency, and thoughtful design, the Bosch D6600 dishwasher represents an outstanding choice for consumers seeking reliability and performance in their kitchen appliances. Whether washing everyday dishes or entertaining guests, this dishwasher exceeds expectations.