Bosch Appliances D6600 Normal Operation Mode, Operating in Manual Mode

Page 35

Conettix Communications Receiver/

D6600/D6100IPv6 Operation en 35

Gateway

 

 

 

11.2

Normal Operation Mode

 

In Normal Operation Mode, the D6600/D6100IPv6 sends messages immediately or in blocks to

 

reporting devices (such as printers and computers) as soon as the devices are ready to

 

receive the information. Signals do not remain visible in the display. If all reporting devices

 

fail, the D6600/D6100IPv6 reverts to Manual Mode until a device returns to service. Normally,

 

the D6600/D6100IPv6 sounds the Operator Alert Buzzer for new events received when the

 

automation link fails.

 

Typical Alarm Receiving Sequence

 

1.

An alarm occurs on Zone 3 at subscriber location 456. The user programs Account 456 to

 

 

report to Line 01 and does not assign Line 01 to report to a call group.

 

2.

The OL LED glows green when the receiver answers the call and receives data.

 

 

The primary reporting device (such as an external printer or automation computer)

 

 

activates. If the external printer is a primary reporting device and Line 01 is not assigned

 

 

to Group Reporting, it prints.

 

3.

If Line 01 is assigned to group 1 Reporting, the receiver’s external printer prints:

 

4.

Line 01 hangs up.

11.3

Operating in Manual Mode

 

If all reporting devices (such as printers and computers) fail, the D6600/D6100IPv6 reverts to

 

Manual Mode until a device returns to service.

 

D6600/D6100IPv6

 

The D6600/D6100IPv6 receives signals while in Manual Mode. The Operator Alert buzzer

 

sounds.

 

1.

Press the Acknowledge button to shut off the operator alert buzzer.

 

 

Shuts off the operator alert buzzer

 

 

Compare the display to the printout to confirm you read the data correctly.

 

 

(For each alarm event, press the Acknowledge button twice; once to acknowledge the

 

 

alarm and once to print the event. As you step through this process, the event number

 

 

will diminish.)

 

2.

Press the Acknowledge button to send the message to a connected printer.

 

3.

Press the Acknowledge button.

 

 

Sends the message to a connected printer.

 

4.

Press the Acknowledge button.

 

5.

Press the Acknowledge button.

 

 

Sends the message to a connected printer.

 

6.

Press the Acknowledge button.

Bosch Security Systems, Inc.

Installation and Operation Guide

2012.11 08 4998122704

Image 35
Contents Conettix Communications Receiver/Gate- way Page Table of contents Central Station Automation System Central Station Tips Network CommunicationsNo Data Received Reports Troubleshooting Guide Specifications Service Information Before Calling Emergency ProceduresBosch Security Systems, Inc. Product Manufacturing Dates IntroductionAbout documentation En Introduction Conettix Communications Receiver Gateway D6600/D6100IPv6 Supported Communication Formats 3System overviewConettix D6100IPv6 System Components Parts ListConettix D6600 System Components D6600 Quick InstallationAutomation PC and External Parallel Printer Connections AC Power and Telephone ConnectionsCallout ᅳ Description Date Setup D6600/D6100IPv6 Setting the Time and DateTime Setup D6600/D6100IPv6 D6600 Front Panel Card Functions and LocationsName Model Description Line Cards and ModulesSystem Trouble LED Status Solid Red or Yellow Clear D6600 Communications Receiver/Gateway Rear View D6600 Rear ViewD6600 Internal View Receiver Card PlacementD6100IPv6 Rear View D6100IPv6 Front PanelD6640/D6641 Line Cards and D6645 Line Terminator Cards D6600 Specific CardsFlash Pattern Color Function Card InstallationD6640/D6641 LED Descriptions Installing Line Cards Installing Terminator CardsD6640/D6641 Telephone Line Monitoring D6610 CPU Card and D6615 CPU Terminator CardReplacing the CPU Card Card Removal and ReplacementRemoving the CPU Card Printer Specifications Shipment D6600 only InstallationInstallation Check List Rack Mount Instructions Removing Power to the ReceiverConnecting External Batteries PowerPower Supply Modules Main Power Standby PowerDevice Qty Battery Standby UPS AC Standby Current Minimum Standby BatteryEstimated BTU Load Minimum Standby UPS PowerUPS Monitoring through CPU Programmable Input Ports Input and Output Ports10.1 Overview of Input and Output Ports Input Reverse Connection Configuration Input Default Connection ConfigurationTerminator Card Configuration 11.1 Process Flow D6600/D6100IPv6 OperationReporting Devices Primary and Secondary How Call Groups WorkBuzzer Operation 11.3 Operating in Manual Mode 11.2 Normal Operation ModeEvent Buffer Display Using the Keypad11.4 Keypad Menu Operation LogKeypad Functions Software Version DisplayLCD/LED Availability Test Function Busy Seconds Line Busy ReportsClear Pending Events Function SIA Two-Way AudioTwo-Way Auto Modes of Operation Enhancements and ChangesPage Plement Network CommunicationsPanel NIC Callout ᅳ Description Operation 12.1 Conettix D6600/D6100IPv6 Pre-installation RequirementsHost Computer for Conettix D6600/D6100IPv6 System Setup Setting Up the Host ComputerProtocol TCP/IP Select Start → Settings → Control PanelDouble-clickLocal Area connection Network administrator Page Page COM1 COM4 Network Failover Solution D6600 OnlyCallout Description Conettix Datagram Type Differences Internal IP Address Source Port Networking and EncryptionUpgrading Encryption Using Encryption for the First TimeUsing Two D6686/D6682/D6680 Modules in a System Obtaining the Latest D6200CD Software 12.3 Special Conettix D6600 ApplicationsD6680/D6682 No 12.4 D6100IPv6 Configuration Setup Instructions12.4.1 Factory Default IP Address 12.4.3 Obtaining an IP Address 12.4.4 Using the D6200 to configure the D6100IPv6Identifying the MAC Hardware Address FTP User Name admin FTP Password Pass Page Cidr D6100IPv6 I&O Guide 12.4.5 Configuring for Network Communication Enter 12.5 D6100i Configuration Setup Instructions12.5.1 Identifying the MAC Hardware Address 12.5.2 Obtaining an IP AddressArp -s xxx.xxx.xxx.xxx zz-zz-zz-zz-zz-zz Initial IP Address Assignment Using ARP.EXESelect Start → Run Click StartControl PanelPrograms Using Telnet to Finish the ConfigurationSelect Programs and Features Select Turn Windows Features on or offConfiguration Using Telnet Page Steps below, type the correct value and press Enter Press Down to view 6.3.6 Network Automation Output Format 12.5.6 Configuring for Network CommunicationPress Down to view the 6.2 Network adapter and press Enter Press Enter1EnterPress Enter to view 6.4.1 IP Address 13.3 Wrong Data 13.2 Data ErrorNo Data Received Reports 13.1 No Data ReceivedReceiver system Direct Connect Central Station Automation SystemReceiver System Standard/Network Automation Central Station Tips 15.7 Test Communicator 15.6 Radio Frequency InterferenceSymptom Problem Solution Troubleshooting GuidePage Symptom Problem Solution Specifications LED Psdn D6600 and D6100IPv6 Listings and Approvals Emergency Data Sheet Service InformationReceiver Connected to Computer System? Yes No Page Page Bosch Security Systems, Inc
Related manuals
Manual 168 pages 55.61 Kb Manual 4 pages 782 b

D6600 specifications

Bosch Appliances is renowned for its innovative and high-quality home appliances, and the Bosch D6600 dishwasher perfectly embodies these values. Designed with the user in mind, the D6600 offers an exceptional cleaning experience combined with advanced technologies and practical features.

One of the standout features of the Bosch D6600 is its outstanding energy efficiency. It boasts an Energy Star certification, ensuring that it operates with minimal energy consumption while still delivering powerful cleaning performance. This not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to minimize their carbon footprint.

The D6600 employs Bosch’s advanced PrecisionWash technology, which uses intelligent sensors to continually scan and determine the level of dirtiness of dishes. This ensures that the dishwasher adjusts its wash cycles accordingly, providing a customized cleaning approach. This system guarantees thorough cleaning of even the toughest food residues, leaving dishes sparkling clean every time.

Quiet operation is another defining characteristic of the Bosch D6600. At just 44 dBA, it is one of the quietest dishwashers in its class, making it an ideal choice for open-concept living spaces or homes where noise is a concern. This level of noise is achieved thanks to Bosch’s insulation technology, which minimizes vibrations and sound emissions.

The dishwasher features a spacious and flexible interior, designed with Bosch’s RackMatic system. This innovative rack adjustment technology allows users to easily customize the loading capacity based on their needs. The top rack can be adjusted to three different heights, accommodating taller items in the bottom rack or larger cookware in the upper storage area.

Another highlight of the Bosch D6600 is its smart technology capabilities. Compatible with Home Connect, this feature enables users to control their dishwasher remotely via a smartphone app. Users can start cycles, receive notifications when the washing is complete, and even diagnose issues, enhancing convenience and user experience.

In addition to its efficient cleaning capabilities and user-friendly features, the Bosch D6600 also includes a robust sanitation option. The Sanitize feature raises water temperature to eliminate 99.9% of bacteria, ensuring that dishes not only look clean but are thoroughly sanitized.

With its combination of cutting-edge technology, energy efficiency, and thoughtful design, the Bosch D6600 dishwasher represents an outstanding choice for consumers seeking reliability and performance in their kitchen appliances. Whether washing everyday dishes or entertaining guests, this dishwasher exceeds expectations.